LC66354B 데이터 시트보기 (PDF) - SANYO -> Panasonic
부품명
상세내역
제조사
LC66354B Datasheet PDF : 23 Pages
| |||
Continued from preceding page.
LC66354B, 66356B, 66358B
Parameter
Symbol
Applicable pins
Frequency
fext
External clock
input
Pulse width
conditions
textH
textL
OSC1
Rise/fall times
textR
textF
Conditions
min
See Figure 1.
With the signal input to
OSC1 and with OSC2
open (with external clock
0.4
input selected for the
oscillator circuit option)
See Figure 1.
With the signal input to
OSC1 and with OSC2
open (with external clock
100
input selected for the
oscillator circuit option)
See Figure 1.
With the signal input to
OSC1 and with OSC2
open (with external clock
input selected for the
oscillator circuit option)
Ratings
typ
Unit Note
max
4.35
MHz
ns
30
ns
Electrical Characteristics at Ta = –30 to + 70°C, VSS = 0 V, VDD = 3.5 to 5.5 V unless otherwise specified
Parameter
Input high level current
Input low level current
Output high level voltage
Output pull-up current
Output low level voltage
Output off leakage current
Comparator offset voltage
Hysteresis
voltage
High level
Schmitt
thresHOLD
characteristics voltage
Low level
thresHOLD
voltage
Symbol
IIH (1)
IIH (2)
IIH (3)
IIL (1)
IIL (2)
VOH (1)
VOH (2)
IPO
VOL (1)
VOL (2)
IOFF (1)
IOFF (2)
VOFF (1)
VOFF (2)
VHIS
Applicable pins
Conditions
min
P2, P3 (except for
the P33/HOLD pin),
P4, P5, P6
VIN = 13.5,
With the output n-channel
transistor off
P0, P1, PC, OSC1,
RES, P33/HOLD
VIN = VDD,
With the output n-channel
transistor off
PD, PE, PC2, PC3
VIN = VDD,
With the output n-channel
transistor off
Inputs other than PD, PE,
VIN = VSS,
With the output n-channel
–1.0
PC2 and PC3
transistor off
PC2, PC3, PD, PE
VIN = VSS,
With the output n-channel
transistor off
–1.0
P2, P3 (except for
the P33/HOLD pin)
P6, PC
IOH = –1 mA
IOH = –0.1 mA
VDD – 1.0
VDD – 0.5
P0, P1, P4, P5
P0, P1, P4, P5
P0, P1, P2, P3, P4, P5,
P6, PC (except for
the P33/HOLD pin)
IOH = –50 µA
IOH = –30 µA
VIN = VSS, VDD = 5.5 V
IOL = 1.6 mA
VDD – 1.0
VDD – 0.5
–1.6
P0, P1, P2, P3, P4, P5,
P6, PC (except for
the P33/HOLD pin)
IOL = 8 mA
P2, P3, P4, P5, P6
P0, P1, PC
PD1, PD2, PD3
PD0
VIN = 13.5 V
VIN = VDD
VIN = VSS to VDD – 1.5 V
VIN = 1.5 to VDD
Ratings
typ
±50
±50
0.1 VDD
Unit Note
max
5.0 µA 1
1.0 µA 1
1.0 µA 1
µA 2
µA 2
V
3
V
4
mA 4
0.4 V
5
1.5 V
5.0 µA 5
1.0 µA 5
±300 mV
±300 mV
V
VtH
P2, P3, P5, P6,
OSC1 (EXT), RES
0.5 VDD
0.8 VDD
V
VtL
0.2 VDD
0.5 VDD
V
Continued on next page.
No. 4677-8/23
Share Link: 