GRM31CR71H225KA88 데이터 시트보기 (PDF) - Murata Manufacturing
부품명
상세내역
제조사
GRM31CR71H225KA88 Datasheet PDF : 237 Pages
| |||
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Oct.1,2012
Explanation of Symbols in This Catalog
Ultra- Lx W dimension: products of 0.6 x 0.3 mm or less
compact
HiQ
Low dissipation for high frequency
By devising ceramic materials and electrode materials,
low dissipation is achieved in frequency bands of VHF,
UHF and microwave or beyond.
Low
ESL
Low inductance
This capacitor is designed so that
the parasitic inductance component (ESL)
that the capacitor has on the high frequency
side becomes lower.
Anti- Product suitable for acoustic noise reduction and low distortion
noise This product suppresses acoustic noise,
which occurs when a ceramic capacitor is used,
by devising the materials and configuration.
Deflecting Product resistant to deflection cracking
crack This capacitor is designed to prevent failures as much
as possible by short mode caused by cracking
when there is board deflection.
Soldering Product with solder cracking suppression
crack This capacitor is configured with metal terminals
and leads connected to the chip.
The metal terminals and leads relieve the stress from expansion
and contraction of the solder, to suppress solder cracking.
Derating Voltage and temperature derating recommended product
This product is suitable when a voltage continuously applied
to a capacitor in an operating circuit, is used below (derated)
the rated voltage of the capacitor.
This model guarantees the test conditions in the endurance test,
at a rated voltage x 100% at the maximum operating temperature.
A reliability assurance level equivalent to a common product
can be secured, by using this product within the voltage and
temperature derated conditions recommended in the figure below.
sRecommended Conditions of the Derating Operating Voltage and Temperature
120
100
125°C Type
80
105°C Type
85°C Type
60
40
20
0
0
25
50
75
100
125
150
Product Temperature (°C)
EU RoHS
Compliant
s All the products in this catalog comply with EU RoHS.
s EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment."
s For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).
For General Purpose GRM Series Capacitance Table
Share Link: 