HLMP-AG06-L0TDD 데이터 시트보기 (PDF) - Avago Technologies
부품명
상세내역
제조사
HLMP-AG06-L0TDD Datasheet PDF : 12 Pages
| |||
Absolute Maximum Ratings at TA = 25˚C
Parameter
DC Forward Current[1]
Red and Amber
50 mA
Peak Pulsed Forward Current[2]
100 mA
Average Forward Current
30 mA
Reverse Voltage (IR = 100 µA)
Power Dissipation
5V
120 mW
LED Junction Temperature
130°C
Operating Temperature Range
–40°C to +100°C
Storage Temperature Range
–40°C to +100°C
Notes:
1. Derate linearly as shown in figure 4.
2. Duty Factor 30%, Frequency 1kHz.
Electrical/Optical Characteristics at TA = 25°C
Parameter
Symbol
Min.
Typ.
Max.
Units
Test Conditions
Typical Viewing Angle
Major
2q1/2
70
deg
Minor
35
Forward Voltage
VF
Red (ld = 626 nm)
Red (ld = 630 nm)
Option xx0xx
Option xxTxx
Amber (ld = 590 nm)
Amber (ld = 592 nm)
Option xx0xx
Option xxRxx, xxSxx
V
2.0
2.4
2.2
2.4
2.3
2.6
2.0
2.4
2.2
2.4
2.3
2.6
IF = 20 mA
Reverse Voltage
Amber, Red
Peak Wavelength
Amber (ld = 592 nm)
Red (ld = 630 nm)
Spectral Halfwidth
Amber (ld = 592 nm)
Red (ld = 630 nm)
Capacitance
Amber, Red
VR
lpeak
∆l1/2
C
5
20
594
639
17
17
40
V
IR = 100 µA
Peak of Wavelength of
nm
Spectral Distribution
at IF = 20 mA
Wavelength Width at
nm
Spectral Distribution 1/2
Power Point at IF = 20 mA
VF = 0, F = 1 MHz
pF
Luminous Efficacy
Amber (ld = 592 nm)
hv
500
Red (ld = 630 nm)
155
Thermal Resistance
RQJ-PIN
240
lm/W
°C/W
Emitted Luminous
Power/Emitted Radiant
Power at IF = 20 mA
LED Junction-to-
Cathode Lead
Notes:
1. 2q1/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity.
2. The radiant intensity, Ie in watts per steradian, may be found from the equation Ie = Iv/hv where Iv is the luminous intensity in candelas and hv is
the luminous efficacy in lumens/watt.
3. The luminous intensity is measured on the mechanical axis of the lamp package.
4. The optical axis is closely aligned with the package mechanical axis.
5. The dominant wavelength, ld, is derived from the CIE Chromaticity Diagram and represents the color of the lamp.
6. For Options -xxRxx, -xxSxx and -xxTxx, max. forward voltage (Vf ) is 2.6 V. Refer to Vf bin table.
Share Link: 