RP40-120512TE 데이터 시트보기 (PDF) - RECOM Electronic GmbH
부품명
상세내역
제조사
RP40-120512TE Datasheet PDF : 5 Pages
| |||
POWERLINE
DC/DC-Converter
RP40-S_D_TE
Series
Specifications (typical at nominal input and 25°C unless otherwise noted)
Voltage Adjustability
Minimum Load (see Note 1)
Line Regulation (low line, high line at full load)
Load Regulation (25% to 100% full load)
Cross Regulation (see Note 8)
Ripple and Noise (20MHz bandwith)
Temperature Coefficient
Transient Response (25% load step change)
Over Voltage Protection
Zener diode clamp (only single)
Short Circuit Protection
Efficiency
Isolation Voltage
Isolation Resistance
Isolation Capacitance
Operating Frequency
Operating Temperature Range
Maximum Case Temperature
Storage Temperature Range
Thermal Impedance
Thermal Shock
Vibration
Relative Humidity
Case Material
Base Material
Potting Material
Conducted Emissions (see Note 9)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
Weight
Dimensions
MTBF (see Note 2)
RP40-xx3.305DE
others
Single
Dual
Triple 3.3V, 5V
Auxiliary
Single
Dual
Triple 3.3V, 5V
Auxiliary
Dual
Triple 3.3V, 5V
Auxiliary
3.3V
5V
12V
15V
Natural convection
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
±10%
20% min.
10% of full load
±0.5%
±1%
±2%
±5%
±0.5%
±1%
±2%
±5%
±1%
±1%
±5%
1%/p-p of Vout max.
±0.02%/°C max.
500µs
3.9V
6.2V
15V
18V
Hiccup, automatic recovery
see „Selection Guide“ table
1600VDC min.
1 GΩ min.
500pF max.
185kHz typ.
-40°C to +85°C(with derating)
+100°C
-55°C to +105°C
7.3°C/Watt
MIL-STD-810D
10-55Hz, 2G, 30 Min. along X, Y and Z
5% to 95% RH
Nickel plated copper
Non-conductive black plastic FR4
Epoxy (UL94-V0)
Level A
Level A
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
48g
76.2 x 66.0 x 10.2mm
1315 x 103 hours
272
July-2006
www.recom-international.com
Share Link: 