HV230G1-G 데이터 시트보기 (PDF) - Supertex Inc

부품명

상세내역

제조사

HV230G1-G

Low Charge Injection, 8-Channel, High Voltage Analog Switches with Bleed Resistors

Supertex Inc 

Ordering Information

Part Number

Package Option

HV230G1-G

26-Lead LLGA

HV230GA-G

26-Ball fpBGA

-G denotes a lead (Pb)-free / RoHS compliant package

Packing

400/Tray

Consult factory

Pin Configuration

26

1

HV230

18

Absolute Maximum Ratings

Parameter

Value

VDD logic power supply voltage

VPP - VNN supply voltage

VPP positive high voltage supply

VNN negative high voltage supply

Logic input voltages

Analog signal range

Peak analog signal current/channel

-0.5V to +15V

220V

-0.5V to VNN +200V

+0.5V to -200V

-0.5V to VDD +0.3V

VNN to VPP

3.0A

Storage temperature

-65OC to +150OC

Power dissipation:

26-Lead LLGA

26-Ball fpBGA

1.0W

1.0W

Absolute Maximum Ratings are those values beyond which damage to the device may occur.

Functional operation under these conditions is not implied. Continuous operation of the device

at the absolute rating level may affect device reliability. All voltages are referenced to device

ground.

Typical Thermal Resistance

Package

26-Lead LLGA

θja

41OC/W

26-Ball fpBGA

-

2

10

26-Lead LLGA

(top view)

123456789

A

B

C

D

E

F

G

H

26-Ball fpBGA

(top view)

Product Marking

YYWW

HV230G1

LLLLLLLL

YY = Year Sealed

WW = Week Sealed

L = Lot Number

= “Green” Packaging

Package may or may not include the following marks: Si or

26-Lead LLGA

YYWW

HV230GA

LLLLLLL

YY = Year Sealed

WW = Week Sealed

L = Lot Number

= “Green” Packaging

Package may or may not include the following marks: Si or

26-Ball fpBGA

Operating Conditions

Sym Parameter

VDD

Logic power supply voltage 1,3

VPP

Positive high voltage supply 1,3

VNN

Negative high voltage supply 1,3

VIH

High level input voltage

VIL

Low-level input voltage

VSIG

Analog signal voltage peak-to-peak2

TA

Operating free air temperature

Notes:

1. Power up/down sequence is arbitrary except GND must be powered-up first and powered-down last.

2. VSIG must be VNN ≤ VSIG ≤ VPP or floating during power up/down transition.

3. Rise and fall times of power supplies VDD, VPP, and VNN should not be less than 1.0msec.

Doc.# DSFP-HV230

C071613

2

Value

4.5V to 13.2V

40V to VNN +200V

-40V to -160V

VDD -1.5V to VDD

0V to 1.5V

VNN +10V to VPP -10V

0OC to 70OC

Supertex inc.

www.supertex.com

Share Link: