ICS9148-36 데이터 시트보기 (PDF) - Integrated Device Technology

부품명

상세내역

제조사

ICS9148-36

Frequency Generator & Integrated Buffers for PENTIUM/Pro™

Integrated Device Technology 

ICS9148 - 36

PCI_STOP# Timing Diagram

PCI_STOP# is an asynchronous input to the ICS9148-36. It is used to turn off the PCICLK (0:5) clocks for low power operation.

PCI_STOP# is synchronized by the ICS9148-36 internally. The minimum that the PCICLK (0:5) clocks are enabled (PCI_STOP#

high pulse) is at least 10 PCICLK (0:5) clocks. PCICLK (0:5) clocks are stopped in a low state and started with a full high pulse

width guaranteed. PCICLK (0:5) clock on latency cycles are only one rising PCICLK clock off latency is one PCICLK clock.

Notes:

1. All timing is referenced to the Internal CPUCLK (defined as inside the ICS9148 device.)

2. PCI_STOP# is an asynchronous input, and metastable conditions may exist. This signal is required to be synchronized

inside the ICS9148.

3. All other clocks continue to run undisturbed.

4. CPU_STOP# is shown in a high (true) state.

8

Share Link: