INA-32063 데이터 시트보기 (PDF) - HP => Agilent Technologies

부품명

상세내역

제조사

INA-32063

3.0 GHz Wideband Silicon RFIC Amplifier

HP => Agilent Technologies 

8

please refer to Agilent application

note AN-A006.

These parameters are typical for

a surface mount assembly

process for the INA-32063. As a

general guideline, the circuit

board and components should

only be exposed to the minimum

temperatures and times neces-

sary to achieve a uniform reflow

of solder.

250

200

150

100

Preheat

Zone

50

Electrostatic Sensitivity

RFICs are electrostatic

discharge (ESD)

sensitive devices.

Although the

INA-32063 is robust in design,

permanent damage may occur to

these devices if they are sub-

jected to high-energy electrostatic

discharges. Electrostatic charges

as high as several thousand volts

(which readily accumulate on the

TMAX

Reflow

Zone

Cool Down

Zone

human body and on test equip-

ment) can discharge without

detection and may result in

degradation in performance or

failure. Electronic devices may be

subjected to ESD damage in any

of the following areas:

• Storage & handling

• Inspection & testing

• Assembly

• In-circuit use

The INA-32063 is an ESD Class 1

device. Therefore, proper ESD

precautions are recommended

when handling, inspecting, and

assembling these devices to avoid

damage.

For more information on

Electrostatic Discharge and

Control refer to Agilent

application note AN-A004R.

0

0

60

120

180

TIME (seconds)

Figure 18. Surface Mount Assembly Profile.

240

300

Share Link: