ISL12029(2006) 데이터 시트보기 (PDF) - Intersil
부품명
상세내역
제조사
ISL12029 Datasheet PDF : 28 Pages
| |||
ISL12029
Absolute Maximum Ratings
Voltage on VDD, VBAT, SCL, SDA, and IRQ/FOUT Pins
(respect to ground) . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 6.0V
Voltage on X1 and X2 Pins
(respect to ground) . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 2.5V
Latchup (Note 1) . . . . . . . . . . . . . . . . . . . Class II, Level B @ +85°C
ESD Rating
MIL-STD-883, Method 3014. . . . . . . . . . . . . . . . . . . . . . . . .>±2kV
Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .>175V
Thermal Information
Thermal Resistance (Note 2)
θJA (°C/W)
14 Ld SOIC Package . . . . . . . . . . . . . . . . . . . . . . . .
100
14 Ld TSSOP Package . . . . . . . . . . . . . . . . . . . . . .
110
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C
Lead Temperature (Soldering, 10s) . . . . . . . . . . . . . . . . . . . . +300°C
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
1. Jedec Class II pulse conditions and failure criterion used. Level B exceptions are: Using a max positive pulse of 8.35V on all pins except X1 and
X2, Using a max positive pulse of 2.75V on X1 and X2, and using a max negative pulse of -1V for all pins.
2. θJA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
DC Electrical Specifications Unless otherwise noted, VDD = +2.7V to +5.5V, TA = -40°C to +85°C, Typical values are at TA = +25°C
and VDD = 3.3V
SYMBOL
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNIT NOTES
VDD
VBAT
Main Power Supply
Backup Power Supply
2.7
5.5
V
1.8
5.5
V
Electrical Specifications
SYMBOL
PARAMETER
CONDITIONS
IDD1 Supply Current with I2C Active
IDD2
IDD3
IBAT
Supply Current for Non-Volatile
Programming
Supply Current for Main
Timekeeping (Low Power Mode)
Battery Supply Current
IBATLKG Battery Input Leakage
VTRIP VBAT Mode Threshold
VTRIPHYS VTRIP Hysteresis
VBATHYS VBAT Hysteresis
VDD SR- VDD Negative Slew Rate
IRQ/FOUT, RESET OUTPUTS
VOL Output Low Voltage
ILO
Output Leakage Current
VDD = 2.7V
VDD = 5.5V
VDD = 2.7V
VDD = 5.5V
VDD = VSDA = VSCL = 2.7V
VDD = VSDA = VSCL = 5.5V
VBAT = 1.8V,
VDD = VSDA = VSCL= VRESET = 0V
VBAT = 3.0V,
VDD = VSDA = VSCL= VRESET = 0V
VDD = 5.5V, VBAT = 1.8V
VDD = 5.5V
IOL = 3mA
VDD = 2.7V
IOL = 1mA
VDD = 5.5V
VOUT = 5.5V
MIN
-100
1.8
TYP
800
850
2.2
30
50
100
MAX
500
800
2.5
3.5
10
20
1000
1200
100
2.6
10
0.4
0.4
400
UNIT
µA
µA
mA
mA
µA
µA
nA
NOTES
3, 4, 5
3, 4, 5
,3
5
3, 6, 7
nA
nA
V
7
mV
7, 9
mV
7, 9
V/ms
8
V
V
nA
4
FN6206.6
October 18, 2006
Share Link: 