ISL8206MIRZ 데이터 시트보기 (PDF) - Intersil
부품명
상세내역
제조사
ISL8206MIRZ Datasheet PDF : 20 Pages
| |||
ISL8204M, ISL8206M
Pin Descriptions (Continued)
PIN
13
14
SYMBOL
DESCRIPTION
COMP/EN
This is the multiplexed pin of the ISL8204M, ISL8206M. During soft-start and normal converter
operation, this pin represents the output of the error amplifier. Use COMP/EN in combination with the
FB pin to compensate for the voltage control feedback loop of the converter. Pulling COMP/EN low
(VENDIS = 0.4V nominal) will disable (shut-down) the controller, which causes the oscillator to stop,
and the high-side gate and low-side gate of the MOSFETs outputs to be held low. The external pull-
down device will initially need to overcome a maximum of 5mA of COMP/EN output current. However,
once the controller is disabled, the COMP/EN output will also be disabled, thus only a 20µA current
source will continue to draw current. Range: 0V to 5V.
FB
The FB pin is the output voltage adjustment of the ISL8204M, ISL8206M. It will regulate to 0.6V at the FB
pin with respect to the PGND pin. The ISL8204M, ISL8206M has an integrated voltage dividing resistor. This
is a precision 9.76kΩ resistor (RFB-TI) between the VOUT and FB pins. Different output voltages can be
programmed with additional resistors between FB to PGND. Range: 0.6V.
4
FN6999.1
February 25, 2010
Share Link: 