L6360TR 데이터 시트보기 (PDF) - STMicroelectronics

부품명

상세내역

제조사

L6360TR

IO-Link communication master transceiver IC

STMicroelectronics 

L6360

Datasheet

IO-Link communication master transceiver IC

Product status link

L6360

Product summary

Order code

L6360TR

Package

VFQFPN 26L

(3.5x5x1 mm)

Packing

Tape and reel

Product label

Features

• Supply voltage from 18 V to 32.5 V

• Programmable output stages: high-side, low-side or push-pull (< 2 Ω)

• Up to 500 mA L+ protected high-side driver

• COM1, COM2 and COM3 mode supported

• Additional IEC61131-2 type 1 input

• Short-circuit and overcurrent output protection through current limitation and

programmable cut-off current

• 3.3 V / 5 V, 50 mA linear regulator

• 5 mA IO-Link digital input

• Fast mode I2C for IC control, configuration and diagnostic

• Diagnostic dual LED sequence generator and driver

• 5 V and 3.3 V compatible I/Os

• Overvoltage protection (> 36 V)

• Overtemperature protection

• ESD protection

• Miniaturized VFQFPN 26L (3.5x5x1 mm) package

Applications

• Industrial sensors

• Factory automation

• Process control

Description

The L6360 is a monolithic IO-Link master port compliant with PHY2 (3-wire)

supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes.

The C/QO output stage is programmable: high-side, low-side or push-pull; also cut-off

current, cut-off current delay time, and restart delay are programmable. Cut-off

current and cut-off current delay time, combined with thermal shutdown and

automatic restart, protect the device against overload and short-circuit. C/QO and L+

output stages are able to drive resistive, inductive and capacitive loads. Inductive

loads up to 10 mJ can be driven. Supply voltage is monitored and low voltage

conditions are detected. The L6360 transfers, through the PHY2(C/QO pin), data

received from a host microcontroller through the USART (IN C/QO pin), or to the

USART (OUT C/QI pin) data received from PHY2 (C/QI pin). To enable full IC control,

configuration and monitoring (i.e. fault conditions stored in the status register), the

communication between the system microcontroller and the L6360 is based on a fast

mode 2-wire I2C. The L6360 has nine registers to manage the programmable

parameters and the status of the IC. Monitored fault conditions are: L+ line,

overtemperature, C/Q overload, linear regulator undervoltage, and parity check.

Internal LED driver circuitries, in open drain configuration, provide two programmable

sequences to drive two LEDs.

DS8900 - Rev 7 - July 2019

For further information contact your local STMicroelectronics sales office.

www.st.com

Share Link: