L6924U
2
Pin description
Figure 3. Pin connection (top view)
Pin description
2.1
Pin description
Table 2.
Pin
1
2
3-4
5
6
7
8
Pin functions
I/O
Name
Pin description
I
VIN Input pin of the power stage.
Supply voltage pin of the signal circuitry.
I
VINSNS The operating input voltage range is from 2.5 V and 12 V, and the
start-up threshold is 4 V.
O
ST2-ST1 Open-collector status pins.
Maximum charging time program pin.
I
TPRG
It must be connected with a capacitor to GND to fix the maximum
charging time, see Chapter 7.8: Maximum charging time on
page 22.
-
GND Ground pin.
Shutdown pin.
I
SD When connected to GND enables the device; when floating
disables the device.
Temperature monitor pin.
It must be connected to a resistor divider including an NTC or PTC
I
TH resistor. The charge process is disabled if the battery temperature
(sensed through the NTC or PTC) is out of the programmable
temperature window see Chapter 8.1: NTC thermistor on page 24.
5/38