LM193ADT 데이터 시트보기 (PDF) - STMicroelectronics
부품명
상세내역
제조사
LM193ADT Datasheet PDF : 15 Pages
| |||
LM193, LM293, LM393
Absolute maximum ratings and operating conditions
2
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings
Symbol
Parameter
Value
Unit
VCC
Vid
Vin
Rthja
Rthjc
Supply voltage
Differential input voltage
Input voltage
Output short-circuit to ground (1)
Thermal resistance junction to ambient(2)
SO-8
TSSOP8
DIP8
MiniSO-8
Thermal resistance junction to case(2)
SO-8
TSSOP8
DIP8
MiniSO-8
±18 or 36
±36
-0.3 to +36
Infinite
125
120
85
190
40
37
41
39
V
V
V
°C/W
°C/W
Tj
Tstg
ESD
Maximum junction temperature
Storage temperature range
HBM: human body model(3)
MM: machine model(4)
CDM: charged device model(5)
150
°C
-65 to +150
°C
800
200
V
1500
1. iSshaoprtp-rcoirxciumitastefrloym20thmeAouintpduetpteonVdeCnCt+ocfatnhecamuasgeneitxucdeessoifvVeChCe+a.ting and potential destruction. The maximum output current
2. Short-circuits can cause excessive heating and destructive dissipation. Values are typical.
3. Human body model: A 100 pF capacitor is charged to the specified voltage, then discharged through a 1.5 kΩ resistor
between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating.
4. Machine model: A 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the
device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of connected pin combinations
while the other pins are floating.
5. Charged device model: all pins and the package are charged together to the specified voltage and then discharged directly
to the ground through only one pin. This is done for all pins.
Table 2. Operating conditions
Symbol
Parameter
Value
Unit
VCC
Vicm
Toper
Supply voltage
Common mode input voltage range (VCC+= 30V)(1)
Tamb = +25°C
Tmin ≤ Tamb ≤ Tmax
Operating free-air temperature range
LM193, LM193A
LM293, LM293A
LM393, LM393A
2 to 36
V
0 to VCC+ -1.5
V
0 to VCC+ -2
-55 to +125
°C
-40 to +105
0 to +70
1. The input common-mode voltage of either input signal voltage should not be allowed to go negative by more than 0.3 V.
The high end of the common-mode voltage range is VCC+ -1.5 V, but either or both inputs can go to +30 V without damage.
3/15
Share Link: 