LMA442 데이터 시트보기 (PDF) - Filtronic PLC
부품명
상세내역
제조사
LMA442 Datasheet PDF : 4 Pages
| |||
• ASSEMBLY DRAWING
LMA442
MEDIUM POWER PHEMT MMIC
Notes:
•
•
•
•
Recommended lead bond technique is thermocompression wedge bonding with 0.001” (25µm) diameter wire. The
bond tool force shall be 35-38 gram. Bonding stage temperature shall be 230-240°C, heated tool (150-160°C) is
recommended. Ultrasonic bonding is not recommended.
The recommended die attach is Ablebond silver epoxy, the stabilize bake temperature is set at 150°C for 45 minutes.
Bond on bond or stitch bond acceptable.
Conductor over conductor acceptable. Conductors must not short.
Phone: (408) 988-1845
Fax: (408) 970-9950
http:// www.filss.com
Revised: 06/21/01
Email: sales@filss.com
Share Link: 