LTC5530
PI FU CTIO S
RFIN (Pin 1): RF Input Voltage. Referenced to VCC. A
coupling capacitor must be used to connect to the RF
signal source. The frequency range is 300MHz to 7GHz.
This pin has an internal 500Ω termination, an internal
Schottky diode detector and a peak detector capacitor.
GND (Pin 2): Ground.
SHDN (Pin 3): Shutdown Input. A logic low on the SHDN
pin places the part in shutdown mode. A logic high enables
the part. SHDN has an internal 160k pulldown resistor to
ensure that the part is in shutdown when no input is
applied. In shutdown VOUT is connected to ground via a
280Ω resistor.
VM (Pin 4): Negative Input to Buffer Amplifier.
VOUT (Pin 5): Detector Output.
VCC (Pin 6): Power Supply Voltage, 2.7V to 6V. VCC should
be bypassed appropriately with ceramic capacitors.
BLOCK DIAGRA
RFSOURCE
VCC
6
1
RFIN
GND 2
BIAS
500Ω
500Ω
SHUTDOWN
31k
25pF
+
RF DET
24k
–
50µA
50µA
SD
40k
160k
3
SHDN
SD
+
BUFFER
–
SD
5 VOUT
4 VM
180Ω
100Ω
5530 BD
5530f
8