M62254 데이터 시트보기 (PDF) - MITSUBISHI ELECTRIC

부품명

상세내역

제조사

M62254

Standard Battery Charger Controller

MITSUBISHI ELECTRIC  

Mitsubishi Semiconductor < DIGI•ANA Interface >

M62254FP

Standard Battery Charger Controller

Word description:

td : The time after VDD reaching Reset release voltage to "High" Reset output.

tRT(1) : The time TC pin voltage changes from 0V to VTH2(L), when VDD is given.

tWD : The time TC pin voltage changes from VTH2(L) to VTH2(H).

tRT(2) : The time TC pin voltage changes from VTH2(H) to VTH2(L).

1. Regarding the pin 25 (Ctd pin) capacity and the delay time (td)

The delay time (td) of Reset output can be found using following equation.

td = 2x10 5 x Ctd (S)

2. Regarding charge and discharge of pin 27 (TC pin)

When incorrect clock is given to the WD pin, the voltage level of TC pin will be changed as show below.

tWD

tRT(1)

tRT(2)

tRT(1) = 8 x 10 3 x Ctd (S)

tWD = 1 x 10 5 x CT (S)

tRT(2) = 2.5 x 10 4 x CT (S)

3. Regarding the input clock, input pulse width, charging time, and discharging time of pin 26 (WD pin)

When correct clock is given to the WD pin, the voltage level of TC pin will be changed as show below.

2.7V

xV

TC

WD

t1

t2

tWDIN(MIN)

0.2V

t1 = 1 x 10 5 x CT x x - 0.2

2.5

t2 = 1 x t1

4

Please, set the pulse width (tWDIN) more than tWDIN(MIN).

Share Link: