MA4E1319-1 데이터 시트보기 (PDF) - M/A-COM Technology Solutions, Inc.
부품명
상세내역
제조사
MA4E1319-1 Datasheet PDF : 7 Pages
| |||
MA4E1317, MA4E1318, MA4E1319-1,
MA4E1319-2, MA4E2160
GaAs Flip Chip Schottky Barrier Diodes
M/A-COM Products
Rev. V7
Mounting Techniques
These chips were designed to be inserted onto hard or soft substrates with the junction side down. They can be
mounted with conductive epoxy or with a low temperature solder preform. The die can also be assembled with
the junction side up, and wire or ribbon bonds made to the pads.
Solder Die Attach:
Solder which does not scavenge gold, such as Indalloy # 2, is recommended. Sn-Pb based solders are not rec-
ommended due to solder embrittlement. Do not expose die to a temperature greater than 235°C, or greater than
200°C for longer than 10 seconds. No more than three seconds of scrubbing should be required for attachment.
Epoxy Die Attach:
Assembly can be preheated to 125 - 150°C. Use a minimum amount of epoxy. Cure epoxy as per manufac-
turer’s schedule. For extended cure times, temperatures should be kept below 200°C.
Handling Procedures
The following precautions should be observed to avoid damaging these chips:
Cleanliness:
The chips should be handled in a clean environment.
Do not attempt to clean die after installation.
Static Sensitivity: Schottky barrier diodes are ESD sensitive and can be damaged by static
electricity. Proper ESD techniques should be used when handling these devices.
General Handling: The protective polymer coating on the active areas of these die provides scratch
protection, particularly for the metal air bridge which contacts the anode. Die can
be handled with tweezers or vacuum pickups and are suitable for use with
automatic pick-and-place equipment.
GaAs Flip Chip Ordering Information
Part Number
MA4E1317
MADS-001317-1278HP
MA4E1318
MADS-001318-1197HP
MA4E1319-1
MA4E1319-2
MA4E2160
Package
Die in Carrier
Pocket Tape on Reel
Wafer on Frame
Pocket Tape on Reel
Die in Carrier
Die in Carrier
Die in Carrier
Standard Quantity per Carrier
100
3000
100
3000
100
100
100
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Share Link: 