MAAPSS0006 데이터 시트보기 (PDF) - Tyco Electronics
부품명
상세내역
제조사
MAAPSS0006 Datasheet PDF : 4 Pages
| |||
MAAPSS0006
Preliminary
Cellular CDMA/AMPS Power Amplifier
824 - 849 MHz
Features
• High Gain 2-stage HBT Amplifier
• Single Supply, 3V Operation
• Dual Mode Operation
• 29 dBm Linear Output Power
• 31.5 dBm CW Output Power
• High Efficiency
• Low Quiescent Current
• Miniature FQFP-N 4mm Plastic Package
Description
M/A-COM’s MAAPSS0006 is a high power, high efficiency
linear power amplifier in a miniature FQFP-N 4mm plastic
package. The MAAPSS0006 includes a 2-stage amplifier and
bias control network. Efficiency of the MAAPSS0006 is
optimized for each mode by an on-chip analog control circuit.
The MAAPSS0006 is ideally suited for CDMA and AMPS
handset applications where high linearity and low power
consumption are important transmitter requirements. The
MAAPSS0006 is design to operate with the MD59-0054
Upconverter/Driver IC.
The MAAPSS0003 is fabricated using M/A-COM’s iHBT
HBT process. The process utilizes the InGaP/GaAs materials
system for reduced performance variation over temperature,
high reliability and improved manufacturability.
Functional Block Diagram
GND 1
GND
RFIN
GND
GND
20
Bias Network
GND
RFOUT
RFOUT
GND
GND
Ordering Information
Part Number
Package
MAAPSS0006
MAAPSS0006TR
MAAPSS0006RTR
FQFP-N 4.0mm Plastic Package
Forward Tape and Reel1
Reverse Tape and Reel1
1. If specific reel size is required, consult factory for part number
assignment.
Electrical Specifications: VCC = 3.4V, Vref = 3.0V, TA = +25°C
Parameter
Frequency Range
Test Conditions
Units
MHz
Min.
824
Typ.
Max.
849
Small Signal Gain
Linear Gain
Linear Output Power
ACPR1
ACPR2
Linear Efficiency
At maximum ACPR Level
At maximum ACPR Level
dB
29
dB
29
dBm
28
29
dBc
-44
dBc
-56
%
32
35
CW Output Power
At maximum ACPR Level
dBm
31.5
CW Efficiency
At maximum ACPR Level
%
45
1. Per IS95: ACPR is defined as the ratio of the total power in a 1.228MHz bandwidth to the power within a 30KHz bandwidth measured at ±885KHz
offset from the carrier frequency.
2. Per IS95: ACPR is defined as the ratio of the total power in a 1.228MHz bandwidth to the power within a 30KHz bandwidth measured at ±1.98MHz
offset from the carrier frequency.
Specifications subject to change without notice.
North America: Tel. (800) 366-2266, Fax (800) 618-8883
Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298
Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Visit www.macom.com for additional data sheets and product information.
V 1.0
1
Share Link: 