MASWSS0067
SPST High Isolation CATV Switch
5 - 1000 MHz
Electrical Specifications: TA = 25°C, VC = 0V / 5V, Z0 = 75 Ω 3
Parameter
Test Conditions
Units
Insertion Loss
Isolation
Return Loss (On)
5 - 50 MHz
dB
50 - 1000 MHz
dB
5 - 50 MHz
dB
50 - 1000 MHz
dB
5 – 50 MHz
dB
50 – 1000 MHz
dB
Return Loss (Off)
(RF1 only)
IP3
5 – 50 MHz
50 – 1000 MHz
Two Tone, +10 dBm / tone, 6 MHz Spacing, > 50 MHz
dB
dB
dBm
Trise, Tfall
10% to 90% RF, 90% to 10% RF
nS
Ton, Toff
50% control to 90% RF, and 50% control to 10% RF
nS
Transients
In Band
mV
Control Current
|Vc| = 5V
µA
3. External DC blocking capacitors are required on all RF ports.
Min.
—
—
—
50
—
—
—
—
—
—
—
—
—
Typ.
0.45
0.65
70
53
30
16
30
18
52
20
40
30
10
Rev. V1
Max.
—
0.9
—
—
—
—
—
—
—
—
—
—
25
Absolute Maximum Ratings 4
Parameter
Absolute Maximum
Max Input Power
(5 - 1000 MHz, 2.5V Control)
+32 dBm
Operating Voltage
Operating Temperature
Storage Temperature
+8.5 volts
-40 oC to +85 oC
-65 oC to +150 oC
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
Truth Table 5
V1
V2
1
0
0
1
5. 0 = 0 V + 0.2 V; 1 = +2.5 V to +5.0 V.
RF1—RF2
On
Off
Qualification
Qualified to M/A-COM Specification Rel 201, Proc-
ess Flow –2.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium arsenide integrated circuits are sensitive to
electrostatic discharge (ESD) and can be damaged
by static electricity. Use proper ESD control pre-
cautions when handling these devices.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.