MAX16910CATA8/V-T 데이터 시트보기 (PDF) - Maxim Integrated

부품명

상세내역

제조사

MAX16910CATA8/V-T

200mA, Automotive, Ultra-Low Quiescent Current, Linear Regulator

Maxim Integrated 

200mA, Automotive, Ultra-Low

Quiescent Current, Linear Regulator

ABSOLUTE MAXIMUM RATINGS

(All voltages referenced to GND.)

IN, ENABLE, SET.................................................. -0.3V to +45V

OUT, RESET (open-drain output)............................-0.3V to +12V

SETOV, TIMEOUT....................................................-0.3V to +6V

Maximum Current (all pins except IN and OUT)...............50mA

Continuous Power Dissipation (TA = +70°C)

TDFN (derate 24.4mW/°C above +70°C)*.............1951mW

SO (derate 23.3mW/°C above +70°C)*................1861mW

*As per JEDEC51 Standard (multilayer board).

Operating Temperature Range..........................-40°C to +125°C

Junction Temperature......................................................+150°C

Storage Temperature Range..............................-65°C to +150°C

Lead Temperature (soldering, 10s).................................+300°C

Soldering Temperature (reflow).......................................+260°C

PACKAGE THERMAL CHARACTERISTICS (Note 1)

TDFN

Junction-to-Ambient Thermal Resistance (qJA)............41°C/W

Junction-to-Case Thermal Resistance (qJC)...................8°C/W

SO

Junction-to-Ambient Thermal Resistance (qJA)............43°C/W

Junction-to-Case Thermal Resistance (qJC)...................7°C/W

Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer

board. For detailed information on package thermal considerations, refer to www.maxim-ic.com/thermal-tutorial.

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional

operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect device reliability.

ELECTRICAL CHARACTERISTICS

(VIN = VENABLE = +14V, CTIMEOUT = open, CIN = 1μF, COUT = 4.7μF, unless otherwise noted. TA = -40°C to +125°C, TA P TJ P

+150°C, unless otherwise noted. Typical values are TA = +25°C.) (Note 2)

PARAMETER

Supply Voltage Range

Supply Current

Shutdown Supply Current

SYMBOL

VIN

ISHDN

CONDITIONS

Continuous

For P 400ms

ILOAD = 0mA, SET = GND, VOUT = 5V

ENABLE = GND, TA = +25NC

ENABLE = GND, -40NC P TA P +125NC

MIN TYP MAX UNITS

3.5

30

V

45

20

30

FA

1.6

3

FA

3

Output Voltage

(5V Fixed Output Setting)

1mA P ILOAD P 200mA,

VIN = 6V to 30V (Note 3)

4.9

5.0

5.1

VOUT50

V

1mA P ILOAD P 50mA,

VIN = 6V to 30V, TJ = +150°C (Notes 3, 4)

4.9

5.0

5.1

Output Voltage

(3.3V Fixed Output Setting)

1mA P ILOAD P 200mA, VIN = 4.8V to 30V

(Note 3)

3.234

3.3

3.366

VOUT33

V

1mA P ILOAD P 50mA, VIN = 4.8V to 30V,

TJ = +150°C (Notes 3, 4)

3.234

3.3

3.366

Adjustable Output-Voltage Range VOUT

1.5

11.0

V

SETOV FB Voltage

VSETOV ILOAD = 1mA (Note 4)

1.225 1.25 1.275

V

Dropout Voltage (Note 5)

DVDO

ILOAD = 200mA, SET = GND, SETOV =

HIGH, VOUT(NORM) = +5.0V

ILOAD = 50mA, SET = GND, SETOV =

HIGH, VOUT(NORM) = +5.0V, TJ = +150°C

(Notes 3, 4)

280 600

mV

600

4  _______________________________________________________________________________________

Share Link: