Ultra-Low-Power, Octal, 12-Bit, 50Msps,
1.8V ADC with Serial LVDS Outputs
PIN
REFERENCE
A8
NAME
REFH
A9
REFIO
A10
REFL
SUPPLY AND BIAS
A7, B8, F7,
G7, L7, M7
AVDD
A11, C10,
D10, E10,
H10, J10,
K10
OGND
A12, F10,
G10, M12
OVDD
B10
SHDN
C3–C9, D3–
D9, E3–E9,
F4, F5, F6,
F8, F9, G4,
G5, G6, G8,
G9, H3–H9,
J3–J9, K3–
K9, L9, M9
GND
F3, G3
OTHER
A1–A6, B1–
B7, L1–L6,
M1–M6
B9
CMOUT
N.C.
I.C.
Pin Description (continued)
FUNCTION
High Reference Bypass. Bypass REFH with a 0.1FF capacitor to REFL. See the Reference
Configurations section for details.
Reference Input/Output. To use internal reference, bypass to GND with a capacitor value of 0.1 FF.
See the Reference Configurations section for an external reference.
Low Reference Bypass. Bypass REFL with a 0.1FF capacitor to REFH. See the Reference
Configurations section for details.
Analog Supply Voltage. Apply 1.8V to all AVDD inputs. Bypass each input to GND with a 0.1FF
capacitor.
Digital Ground. Connect all GND (analog ground) and OGND (digital ground) pins to the board
ground plane.
Digital Supply Voltage. Digital and output driver supply input. Apply 1.8V to all OVDD inputs.
Bypass each input to GND with a 0.1FF capacitor.
Active-High Power-Down. Programmable power-management state selection. See the Power
Management section for details.
Analog Ground. Connect all GND (analog ground) and OGND (digital ground) pins to the board
ground plane.
Common-Mode Output. Input common-mode reference output. Bypass CMOUT with a 1FF
capacitor to GND.
No Connection. Not internally connected.
Internal Connection. Leave I.C. unconnected.
11