MAX7219EWG(2003) 데이터 시트보기 (PDF) - Maxim Integrated
부품명
상세내역
제조사
MAX7219EWG Datasheet PDF : 17 Pages
| |||
MAX7219/MAX7221
Serially Interfaced, 8-Digit LED Display Drivers
Table 11. RSET vs. Segment Current and
LED Forward Voltage
VLED (V)
ISEG (mA)
1.5
2.0
2.5
3.0
3.5
40
12.2 11.8 11.0 10.6 9.69
30
17.8 17.1 15.8 15.0 14.0
20
29.8 28.0 25.9 24.5 22.6
10
66.7 63.7 59.3 55.4 51.2
Table 12. Package Thermal Resistance
Data
PACKAGE
THERMAL RESISTANCE
(θJA)
24 Narrow DIP
+75°C/W
24 Wide SO
+85°C/W
24 CERDIP
+80°C/W
Maximum Junction Temperature (TJ) = +150°C
Maximum Ambient Temperature (TA) = +85°C
Computing Power Dissipation
The upper limit for power dissipation (PD) for the
MAX7219/MAX7221 is determined from the following
equation:
PD = (V+ x 8mA) + (V+ - VLED)(DUTY x ISEG x N)
where:
V+ = supply voltage
DUTY = duty cycle set by intensity register
N = number of segments driven (worst case is 8)
VLED = LED forward voltage
ISEG = segment current set by RSET
Dissipation example:
ISEG = 40mA, N = 8, DUTY = 31/32, VLED = 1.8V at
40mA, V+ = 5.25V
PD = (5.25V x 8mA) + (5.25V - 1.8V)(31/32 x
40mA x 8) = 1.11W
Thus, for a CERDIP package (θJA = +80°C/W from
Table 12), the maximum allowed ambient temperature
TA is given by:
TJ(MAX) = TA + PD x θJA
150°C = TA +1.11W x 80°C/W
where TA = +61.2°C.
The TA limits for PDIP and SO packages in the dissipation
example above are +66.7°C and +55.6°C, respectively.
Cascading Drivers
The example in Figure 3 drives 16 digits using a 3-wire
µP interface. If the number of digits is not a multiple of
8, set both drivers’ scan limits registers to the same
number so one display will not appear brighter than the
other. For example, if 12 digits are need, use 6 digits
per display with both scan-limit registers set for 6 digits
so that both displays have a 1/6 duty cycle per digit. If
11 digits are needed, set both scan-limit registers for 6
digits and leave one digit driver unconnected. If one
display for 6 digits and the other for 5 digits, the sec-
ond display will appear brighter because its duty cycle
per digit will be 1/5 while the first display’s will be 1/6.
Refer to the No-Op Register section for additional infor-
mation.
Maxim Integrated
11
Share Link: 