MB89673RPF 데이터 시트보기 (PDF) - Fujitsu
부품명
상세내역
제조사
MB89673RPF Datasheet PDF : 59 Pages
| |||
MB89670R/670AR Series
(Continued)
Pin no.
LQFP*1
QFP*2
MQFP*3
47
49
Pin name
P47/EC
74 to 67 76 to 69 P50/AN0 to
P57/AN7
66
68
P60/INT0/
ADST
65 to 59 67 to 61 P61/INT1 to
P67/INT7
4
6
P70/BZ1
3
5
P71/UCK
2
4
P72/UO
1
3
P73/UI
80
2
P74/SCK
79
1
P75/SO
78
8 to 5,
57,
58
53
13,
56
75
76
77
80
P76/SI
10 to 7,
59,
60
55
15,
58
77
P80 to P83,
P85,
P84
VCC
VSS
AVCC
78
AVR
79
AVSS
*1: FPT-80P-M11
*2: FPT-80P-M06
*3: MQP-80C-P01
Circuit
type
Function
E General-purpose I/O port
Also serves as the input for the16-bit timer/counter.
The EC input is of a hysteresis input type.
I
N-ch open-drain output ports
Also serve as the analog inputs for the 10-bit A/D
converter.
J General-purpose input port
The software pull-up resistor is provided.
Also serves as an external interrupt input (INT0) and an
10-bit A/D converter external start-up.
This port is of a hysteresis input type.
J General-purpose input ports
A software pull-up resistor is provided.
Also serve as external interrupt inputs (INT1 to INT7).
These ports are of a hysteresis input type.
G N-ch open-drain I/O port
Also serves as a buzzer output.
K N-ch open-drain I/O port
Also serves as a UART clock I/O (UCK), switchable to
CMOS.
K N-ch open-drain I/O port
Also serves as a UART data output (UO), switchable to
CMOS.
G N-ch open-drain I/O port
Also serves as a UART data input (UI).
K N-ch open-drain I/O port
Also serves as the clock I/O (SCK) for the 8-bit serial I/O,
switchable to CMOS.
K N-ch open-drain I/O port
Also serves as the data output (SO) for the 8-bit serial
I/O, switchable to CMOS.
G N-ch open-drain I/O port
Also serves as the data input (SI) for the 8-bit serial I/O.
H N-ch open-drain output ports
— Power supply pin
— Power supply (GND) pin
— A/D converter power supply pin
Use this pin at the same voltage as VCC.
— A/D converter reference voltage input pin
— A/D converter power supply pin
Use this pin at the same voltage as VSS.
11
Share Link: 