MB90520B(2008) 데이터 시트보기 (PDF) - Fujitsu
부품명
상세내역
제조사
MB90520B Datasheet PDF : 104 Pages
| |||
MB90520B Series
Pin No.
LQFP-120*1
QFP-120*2
117
118
120
1
2
3
4
5
6
7
Pin Name
Circuit
Type
Function
P26
ZIN0
INT7
P27
ADTG
P30
P31
CKOT
P32
OUT0
P33
OUT1
P34
OUT2
P35
OUT3
P36
PPG00
P37
PPG01
General-purpose I/O port
E
Also can be used as the control clock Z input to 8/16-bit up/down counter/
timer 0.
Event input pin for ch.7 of the DTP/external interrupt circuit
General-purpose I/O port
External trigger input to the 8/10-bit A/D converter
E Input operates continuously when the 8/10-bit A/D converter is performing
input. Accordingly, output to the pin from other functions that share this
pin must be suspended unless performed intentionally.
E General-purpose I/O port
General-purpose I/O port
E Output pin for clock monitor function
The clock monitor is output when clock monitor output is enabled.
General-purpose I/O port
Only available when waveform output from output compare 0 is disabled.
E
Event output pin for ch.0 of output compare unit 0 (OCU)
Only available when event output is enabled for output compare unit 0.
General-purpose I/O port
Only available when waveform output from output compare 1 is disabled.
E
Event output pin for ch.1 of output compare unit 0 (OCU)
Only available when event output is enabled for output compare unit 0.
General-purpose I/O port
Only available when waveform output from output compare 2 is disabled.
E
Event output pin for ch.2 of output compare unit 0 (OCU)
Only available when event output is enabled for output compare unit 0.
General-purpose I/O port
Only available when waveform output from output compare 3 is disabled.
E
Event output pin for ch.3 of output compare unit 0 (OCU)
Only available when event output is enabled for output compare unit 0.
General-purpose I/O port
Only available when waveform output from PPG00 is disabled.
E
Output pin for 8/16-bit PPG timer 0
Only available when waveform output is enabled for PPG00.
General-purpose I/O port
Only available when waveform output from PPG01 is disabled.
E
Output pin for 8/16-bit PPG timer 0
Only available when waveform output is enabled for PPG01.
*1 : FPT-120P-M24
*2 : FPT-120P-M13
(Continued)
DS07-13707-5E
9
Share Link: 