MB91110 데이터 시트보기 (PDF) - Fujitsu

부품명

상세내역

제조사

MB91110

32-Bit RISC Microcontroller

Fujitsu 

MB91110 Series

Pin no. Pin name

120 DACK0/PG1

121 DEOP0/PG2

122 DREQ1/PG3

123 DACK1/PG4

124 DEOP1/PG5

127 DREQ2/PH0

128 DACK2/PH1

I/O* Circuit type

Function

[DACK0] This is the DMAC external transfer request recep-

tion output (ch 0) . This function is effective if the transfer re-

quest reception output specification of DMAC is permitted.

I/O

C

[PG1] This is a multi-purpose input/output port. This function

is effective if the transfer request reception output specifica-

tion of DMAC is prohibited.

[DEOP0] This is the DMA transfer end signal output (ch 0) .

This function is effective if the transfer end signal output

specification of DMAC is permitted.

I/O

C

[PG2] This is a multi-purpose input/output port. This function

is effective if the transfer end signal output specification of

DMAC is prohibited.

[DREQ1] This is the DMA external transfer request input (ch

1) . This input is always used if selected as the transfer factor

I/O

H

of DMAC, so output using other functions should be stopped

except when carried out intentionally.

[PG3] This is a multi-purpose input/output port.

[DACK1] This is the DMAC external transfer request recep-

tion output (ch 1) . This function is effective if the transfer re-

quest reception output specification of DMAC is permitted.

I/O

C

[PG4] This is a multi-purpose input/output port. This function

is effective if the transfer request reception output specifica-

tion of DMAC is prohibited.

[DEOP1] This is the DMA transfer end signal output (ch 1) .

This function is effective if the transfer end signal output

specification of DMAC is permitted.

I/O

C

[PG5] This is a multi-purpose input/output port. This function

is effective if the transfer end signal output specification of

DMAC is prohibited.

[DREQ2] This is the DMA external transfer request input (ch

2) . This input is always used if selected as the transfer factor

I/O

H

of DMAC, so output using other functions should be stopped

except when carried out intentionally.

[PH0] This is a multi-purpose input/output port.

[DACK2] This is the DMAC external transfer request recep-

tion output (ch 2) . This function is effective if the transfer re-

quest reception output specification of DMAC is permitted.

I/O

C

[PH1] This is a multi-purpose input/output port. This function

is effective if the transfer request reception output specifica-

tion of DMAC is prohibited.

(Continued)

9

Share Link: