MB91F313PMC-GE1 데이터 시트보기 (PDF) - Fujitsu

부품명

상세내역

제조사

MB91F313PMC-GE1

32-bit Microcontroller CMOS

Fujitsu 

MB91313 Series

7. Serial Interface

• 11 channels

• Full duplex double buffer

• Communication mode : Asynchronous (start-stop synchronization) communication, clock synchronous

communication (8.25 Mbps Max), I2C* standard mode (100 kbps Max), high-speed mode (400 kbps Max)

• Parity on/off selectable

• Baud rate generators for each channel

• Extensive error detection functions : Parity, frame, and overrun

• External clock can be used as transfer clock

• Ch.0 to ch.2 : DMA transfers/each equipped with a pair of 16-byte transmit and receive FIFOs

• Ch.8 to ch.10 : 5 V tolerant

• Ch.8 : Open drain outputs

• I2C bridge function (bridges between channels 0, 1, and 2)

• SPI mode

8. Interrupt Controller

• External interrupt lines: Total of 24 lines (INT23 to INT0)

• Interrupts from internal peripherals

• Programmable 16 priority levels

• Capable of using wakeup from STOP mode

9. 10-bit A/D Converter

• 10 channels

• Successive approximation type : Conversion time : About 7.94 µs

• Conversion mode : Single-shot conversion mode, scan conversion mode

• Activation sources : Software/external trigger

10. PPG

• 4 channels

• 16-bit down counter, 16-bit data register with cycle setting buffer

• Internal clock : Frequency division selected from 1, 4, 16, and 64

• Support for automatic cycle setting by DMA transfer

• Function for supporting remote control transmission

• Open drain outputs

11. PWC

• 1 channel (1 input)

• 16-bit up counter

• Simple digital lowpass filter

12. Multi-function Timer

• 4 channels

• Lowpass filter eliminating noise below a pre-set clock frequency

• Capable of pulse width measurement using seven types of clock signals

• Pin input event count function

• Interval timer function using seven types of clock signals and external input clock

• Internal HSYNC counter mode

(Continued)

3

Share Link: