MCP1318MT-46LE/OT 데이터 시트보기 (PDF) - Microchip Technology

부품명

상세내역

제조사

MCP1318MT-46LE/OT

Voltage Supervisor

Microchip Technology 

MCP131X/2X

DC CHARACTERISTICS (CONTINUED)

Electrical Specifications: Unless otherwise indicated, all limits are specified for VDD = 1V to 5.5V, RPU = 100 kΩ

(only MCP1320, MCP1321 and MCP1322), TA = -40°C to +125°C.

Parameters

Sym Min Typ Max Units

Conditions

VDD Trip Point

MCP13XX-20 VTRIP 1.970 2.00 2.030 V TA = +25°C (Note 1)

(Note 6)

1.950 2.00 2.050 V TA = -40°C to +85°C (Note 2)

MCP13XX-21

2.069 2.10 2.132 V TA = +25°C (Note 1)

(Note 6)

2.048 2.10 2.153 V TA = -40°C to +85°C (Note 2)

MCP13XX-22

2.167 2.20 2.233 V TA = +25°C (Note 1)

(Note 6)

2.145 2.20 2.255 V TA = -40°C to +85°C (Note 2)

MCP13XX-23

2.266 2.30 2.335 V TA = +25°C (Note 1)

(Note 6)

2.243 2.30 2.358 V TA = -40°C to +85°C (Note 2)

MCP13XX-24

2.364 2.40 2.436 V TA = +25°C (Note 1)

(Note 6)

2.340 2.40 2.460 V TA = -40°C to +85°C (Note 2)

MCP13XX-25

2.463 2.50 2.538 V TA = +25°C (Note 1)

(Note 6)

2.438 2.50 2.563 V TA = -40°C to +125°C (Note 2)

MCP13XX-26

2.561 2.60 2.639 V TA = +25°C (Note 1)

(Note 6)

2.535 2.60 2.665 V TA = -40°C to +125°C (Note 2)

MCP13XX-27

2.660 2.70 2.741 V TA = +25°C (Note 1)

(Note 6)

2.633 2.70 2.768 V TA = -40°C to +125°C (Note 2)

MCP13XX-28

2.758 2.80 2.842 V TA = +25°C (Note 1)

(Note 6)

2.730 2.80 2.870 V TA = -40°C to +125°C (Note 2)

MCP13XX-29

2.857 2.90 2.944 V TA = +25°C (Note 1)

2.828 2.90 2.973 V TA = -40°C to +125°C (Note 2)

MCP13XX-30

2.955 3.00 3.045 V TA = +25°C (Note 1)

(Note 6)

2.925 3.00 3.075 V TA = -40°C to +125°C (Note 2)

MCP13XX-31

3.054 3.10 3.147 V TA = +25°C (Note 1)

(Note 6)

3.023 3.10 3.178 V TA = -40°C to +125°C (Note 2)

MCP13XX-32

3.152 3.20 3.248 V TA = +25°C (Note 1)

(Note 6)

3.120 3.20 3.280 V TA = -40°C to +125°C (Note 2)

MCP13XX-33

3.251 3.30 3.350 V TA = +25°C (Note 1)

(Note 6)

3.218 3.30 3.383 V TA = -40°C to +125°C (Note 2)

Note 1: Trip point is ±1.5% from typical value.

2: Trip point is ±2.5% from typical value.

3: Hysterysis is minimum = 1%, max = 6% at +25°C.

4: This specification allows this device to be used in PICmicro® microcontroller applications that require the

In-Circuit Serial Programming™ (ICSP™) feature (see device-specific programming specifications for

voltage requirements). The total time that the RST pin can be above the maximum device operational volt-

age (5.5V) is 100s. Current into the RST pin should be limited to 2 mA. It is recommended that the device

operational temperature be maintained between 0°C to +70°C (+25°C preferred). For additional informa-

tion, refer to Figure 2-35.

5: This parameter is established by characterization and is not 100% tested.

6: Custom ordered voltage trip point; minimum order volume requirement. Information available upon request.

© 2005 Microchip Technology Inc.

DS21985A-page 3

Share Link: