MIC2560-1BWM(1999) 데이터 시트보기 (PDF) - Micrel
부품명
상세내역
제조사
MIC2560-1BWM Datasheet PDF : 12 Pages
| |||
MIC2560
Symbol
Parameter
Power Supply
ICC5
VCC5 IN Supply Current
ICC3
VCC3 IN Supply Current
IPP IN
VCC5 IN
VCC3 IN
VPP IN
VPP IN Supply Current
(IPP OUT = 0)
Operating Input Voltage
Operating Input Voltage
Operating Input Voltage
Conditions
ICC OUT = 0
VCC OUT = 5V or 3.3V, ICC OUT = 0
VCC OUT = hi-Z (Sleep mode)
VCC active, VPP OUT = 5V or 3.3V
VPP OUT = hi-Z, 0 or VPP
VCC5 IN ≥ VCC3 IN
VCC3 IN ≤ VCC5 IN
Micrel
Min Typ Max Units
0.01 10
µA
30
50
µA
0.01 10
µA
15
50
µA
0.01 10
µA
VCC3 IN 5.0
6
V
2.8
3.3 VCC5 IN V
8.0 12.0 14.5
V
Suspend Mode (Note 4)
ICC3
Active Mode Current
VPP IN = 0V, VCC5 = VCC3 = 3.3V
VCC3 = enabled
VPP = disabled (hi-Z or 0V)
30
µA
RON VCC
VCC OUT RON
VPP IN = 0V, VCC5 = VCC3 = 3.3V
VCC3 = enabled
VPP = disabled (hi-Z or 0V)
4.5
Ω
Note 1.
Note 2.
Note 3.
Note 4.
Functional operation above the absolute maximum stress ratings is not implied.
Static-sensitive device. Store only in conductive containers. Handling personnel and equipment should be grounded to prevent damage from
static discharge.
Leakage current after 1,000 hours at 125°C may increase up to five times the initial limit.
Suspend mode is a pseudo-power-down mode the MIC2560 automatically allows when VPP IN = 0V, VPP OUT is deselected, and VCC OUT =
3.3V is selected. Under these conditions, the MIC2560 functions in a reduced capacity mode where VCC output of 3.3V is allowed, but at
lower current levels (higher switch on-resistance).
MIC2560
4
November 1999
Share Link: 