ML7000-03MA 데이터 시트보기 (PDF) - Oki Electric Industry

부품명

상세내역

제조사

ML7000-03MA

Single Rail CODEC

Oki Electric Industry 

¡ Semiconductor

ML7000-01/02/03/ML7001-01/02/03

PWI, AOUT+, AOUT–

PWI is connected to the inverting input of the receive driver.

The receive driver output is connected to the AOUT– pin. Therefore, the receive level can be

adjusted with the pins VFRO, PWI, and AOUT–. During power-saving or power down-mode,

the outputs of AOUT+ and AOUT– are in a high impedance state. The output of AOUT+ is

inverted with respect to the output of AOUT–. Since these outputs provide differential drive of

an impedance of 1.2 kW, they can directly be connected to a handset using a piezoelectric

earphone or a line transformer. Refer to the application example.

VI

Receive filter VFRO R6

PWI

R7

–

SG +

AOUT–

20 kW

–

SG +

20 kW

AOUT+

VO ZL

R6 > 20 kW

ZL > 1.2 kW

Gain = VO/VI = 2 5 R7/R6 £ 2

VDD

Power supply for +5 V (ML7000-xx) or +3 V (ML7001-xx)

PCMIN

PCM data input.

A serial PCM data input to this pin is converted to an analog signal in synchronization with the

RSYNC signal and BCLK signal.

The data rate of PCM is equal to the frequency of the BCLK signal.

PCM signal is shifted in at the falling edge of the BCLK signal and latched into the internal

register when shifted by eight bits.

The start of the PCM data (MSD) is identified at the rising edge of RSYNC.

BCLK

Shift clock signal input for the PCMIN and PCMOUT signals.

The frequency, equal to the data rate, is 64, 96, 128, 192, 256, 384, 512, 768, 1024, 1536, 1544, or 2048

kHz. Setting this signal to logic "1" or "0" drives both transmit and receive circuits to the power

saving state.

5/19

Share Link: