DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

EV2104DJ-00A 데이터 시트보기 (PDF) - Monolithic Power Systems

부품명
상세내역
제조사
EV2104DJ-00A
MPS
Monolithic Power Systems MPS
EV2104DJ-00A Datasheet PDF : 10 Pages
1 2 3 4 5 6 7 8 9 10
TM
The Future of Analog IC Technology TM
MP2104
1.7MHz, 600mA Synchronous
Step-Down Converter
DESCRIPTION
The MP2104 is a 1.7MHz constant frequency,
current mode, PWM step-down converter. The
device integrates a main switch and a
synchronous rectifier for high efficiency without an
external Schottky diode. It is ideal for powering
portable equipment that runs from a single cell
Lithium-Ion (Li+) battery. The MP2104 can supply
600mA of load current from a 2.5V to 6V input
voltage. The output voltage for the MP2104DJ
can be regulated as low as 0.6V, while the output
voltages of the MP2104DJ-1.5 and
MP2104DJ-1.8 are fixed at 1.5V and 1.8V,
respectively. The MP2104 can also run at 100%
duty cycle for low dropout applications.
The MP2104 is available in a low profile (1mm)
5-pin, TSOT package.
ORDERING INFORMATION
Part Number
Output Voltage
MP2104DJ-1.5
MP2104DJ-1.8
MP2104DJ
VOUT = 1.5V
VOUT = 1.8V
VOUT = 0.6V to 6V
EVALUATION BOARD REFERENCE
Board Number
EV2104DJ-00A
Dimensions
2.0”X x 2.0”Y x 0.5”Z
FEATURES
High Efficiency: Up to 95%
1.7MHz Constant Switching Frequency
600mA Available Load Current
2.5V to 6V Input Voltage Range
Output Voltage as Low as 0.6V
100% Duty Cycle in Dropout
Current Mode Control
Short Circuit Protection
Thermal Fault Protection
<0.1µA Shutdown Current
1.5V and 1.8V Fixed Output Versions
Space Saving 5-Pin TSOT23 Package
APPLICATIONS
Cellular and Smart Phones
Microprocessors and DSP Core Supplies
PDAs
MP3 Players
Digital Still and Video Cameras
Portable Instruments
“MPS” and “The Future of Analog IC Technology” are Trademarks of Monolithic
Power Systems, Inc.
TYPICAL APPLICATION
INPUT
2.5V - 6V
OFF ON
4
IN
SW 3
MP2104DJ-1.8
1 EN
5
OUT
GND
2
OUTPUT
1.8V
600mA
MP2104_TAC_S01
Efficiency vs
Load Current
100
90 VIN = 3.3V
80
70
VIN = 4.2V
60
50
40
30
20
10
0
10
100
1000
LOAD CURRENT (mA)
MP2104-EC01
MP2104 Rev. 1.3
www.MonolithicPower.com
1
10/4/2005
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2005 MPS. All Rights Reserved.

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]