MSM7716GS-K 데이터 시트보기 (PDF) - Oki Electric Industry

부품명

상세내역

제조사

MSM7716GS-K

Single Rail Linear CODEC

Oki Electric Industry 

¡ Semiconductor

MSM7716

SYNC

Synchronizing signal input.

In the transmit section, the PCM output signal from the PCMOUT pin is output synchronously

with this synchronizing signal. This synchronizing signal triggers the PLL and synchronizes all

timing signals of the transmit section.

In the receive section, 14 bits required are selected from serial input of PCM signals on the PCMIN

pin by the synchronizing signal.

Signals in the receive section are synchronized by this synchronizing signal. This signal must be

synchronized in phase with the BCLK.

When this signal frequency is 8 kHz, the transmit and receive section have the frequency

characteristics specified by ITU-T G. 714. The frequency characteristics for 8 kHz are specified in

this data sheet.

For different frequencies of the SYNC signal, the frequency values in this data sheet should be

translated according to the following equation:

Frequency

values

described

8 kHz

in

the

data

sheet

¥

the

SYNC

frequency

values

to

be

actually

used

Setting this signal to logic "1" or "0" drives the device to power-saving state.

PCMIN

PCM signal input.

A serial PCM signal input to this pin is converted to an analog signal synchronously with the

SYNC signal and BCLK signal.

The data rate of the PCM signal is equal to the frequency of the BCLK signal.

The PCM signal is shifted at a falling edge of the BCLK signal. The PCM signal is latched into the

internal register when shifted by 14 bits.

The top of the data (MSD) is identified at the rising edge of SYNC.

The input signal should be input in the 14-bit 2's complement format.

The MSD bit represents the polarity of the signal with respect to the signal ground.

6/22

Share Link: