MT8816 데이터 시트보기 (PDF) - Zarlink Semiconductor Inc
부품명
상세내역
제조사
MT8816 Datasheet PDF : 12 Pages
| |||
MT8816
Data Sheet
DC Electrical Characteristics- Switch Resistance - VDC is the external DC offset applied at the analog I/O pins.
Characteristics
Sym.
25°C
70°C
85°C
Units
Test Conditions
Typ. Max. Typ. Max. Typ. Max.
1 On-state VDD=12V RON 45 65
75
80
Ω VSS=VEE=0 V,VDC=VDD/2,
Resistance VDD=10V
55 75
85
90
Ω IVXi-VYjI = 0.4 V
VDD= 5V
120 185
215
225 Ω See Appendix, Fig. A.2
(See G.1, G.2, G.3 in
Appendix)
2 Difference in on-state ∆RON 5 10
10
10
Ω VDD=12V, VSS=VEE=0,
resistance between
VDC=VDD/2,
two switches
IVXi-VYjI = 0.4 V
(See G.4 in Appendix)
See Appendix, Fig. A.2
AC Electrical Characteristics† - Crosspoint Performance-Voltages are with respect to VDD= 5 V, VSS= 0 V, VEE= -7 V, unless
otherwise stated.
Characteristics
Sym. Min. Typ.‡ Max. Units
Test Conditions
1 Switch I/O Capacitance
2 Feedthrough Capacitance
3 Frequency Response
Channel “ON”
20LOG(VOUT/VXi)=-3 dB
4 Total Harmonic Distortion
(See G.5, G.6 in Appendix)
5 Feedthrough
Channel “OFF”
Feed.=20LOG (VOUT/VXi)
(See G.8 in Appendix)
CS
CF
F3dB
THD
FDT
20
0.2
45
0.01
-95
pF
pF
MHz
%
dB
f=1 MHz
f=1 MHz
Switch is “ON”; VINA = 2Vpp
sinewave; RL = 1 kΩ
See Appendix, Fig. A.3
Switch is “ON”; VINA = 2Vpp
sinewave f= 1 kHz; RL=1 kΩ
All Switches “OFF”; VINA=
2Vpp sinewave f= 1 kHz;
RL= 1 kΩ.
See Appendix, Fig. A.4
6 Crosstalk between any two
Xtalk
-45
channels for switches Xi-Yi and
Xj-Yj.
-90
Xtalk=20LOG (VYj/VXi).
-85
(See G.7 in Appendix).
-80
dB VINA=2Vpp sinewave
f= 10 MHz; RL = 75 Ω.
dB VINA=2Vpp sinewave
f= 10 kHz; RL = 600 Ω.
dB VINA=2Vpp sinewave
f= 10 kHz; RL = 1 kΩ.
dB VINA=2Vpp sinewave
f= 1 kHz; RL = 10 kΩ.
Refer to Appendix, Fig. A.5
for test circuit.
7 Propagation delay through
tPS
switch
30
ns RL=1 kΩ; CL=50 pF
† Timing is over recommended temperature range. See Fig. 3 for control and I/O timing details.
‡ Typical figures are at 25°C and are for design aid only; not guaranteed and not subject to production testing.
Crosstalk measurements are for Plastic DIPS only, crosstalk values for PLCC packages are approximately 5 dB better.
6
Zarlink Semiconductor Inc.
Share Link: 