MW39962AE 데이터 시트보기 (PDF) - Panasonic Corporation
부품명
상세내역
제조사
MW39962AE Datasheet PDF : 6 Pages
| |||
MW39962AE
■ Image Sensor Characteristics Ta = 25°C
Parameter
Conditions
Min
Typ
Max Unit
Remarks
Saturation output
F value adjust
650
800
mV at CCD out
(Minimum point in image)
Standard output
J chart standard light 140
155
mV at CCD out
intensity
Image lag
1/10 light intensity
0
% Able to be swept out
directly to substrate
Vertical smear
1/10 V
−127 −124
dB Ratio to standard output
2 MHz driving
Dark
shading
H 60°C, dark condition
V
2
mV at CCD out
Electronic shutter
Specified driving
No abnormality within 1/100 to 1/2 000 seconds
Note) 1. The substrate voltage (Sub 1) should be adjusted to the minimum voltage that would not cause blooming, overflow and
injection at image sensor of light input of 1 600 times the standard light intensity.
2. The standard light intensity is the one when the exposure is done at an aperture of F/11 using a light source of 2 856K and
920 nt and placing a color temperature conversion filter LB-40 (HOYA) and an IR cutting filter CAW-500S (t = 2.5 mm) in
the light path.
■ Package Dimensions (unit: mm)
• WDIP032-G-0750A (Lead-free package)
33.00±0.3
25.50±0.3
B
16.32±0.3
32
φ2.0 × 2.5
17
Tolerance: ±0.20 unless otherwise specified
D
φ2.00
1
16
C
A
18.55±0.1
1.778±0.13
(0.80)
0.46±0.05
0.25 M
1. The package center does not meet the center of the effective pixel area.
A is the center of the effective pixel area.
2. The reference of a vertical direction(V) is the side B.
The reference of a horizontal direction(H) is the side C.
The reference of a height direction is the package bottom D.
3. The rotation precision of the effective pixel area: maximum ±1.5°
4. The distance from the package bottom D to the effective pixel area
: 1.69 mm ± 0.3 mm
5. The tilt of the effective pixel area toward the package bottom D
: Up to 60 µm (D' = DO ± max. 0.03 mm)
6. The thickness of the seal glass is: 0.7 mm ± 0.1 mm, and the
refractive index: 1.50
SMD00016AEC
5
Share Link: 