NJU7327 데이터 시트보기 (PDF) - Japan Radio Corporation

부품명

상세내역

제조사

NJU7327

Single-phase DC Brushless Motor Driver IC

Japan Radio Corporation  

NJU7327

I APPLICATION NOTE

The NJU7327 is a single-phase DC brushless motor driver IC in small VSP-10 package.

With minimal external components, it can drive up to 200mA of motor current for small fan application.

[Application Circuit Example]

V+ D1

C1

GND

R3

R1

Hall

element

VDD

IN+

IN-

OUTA

Motor

[Design Notes]

R2

LD

OUTB

C2

NJU7327

VSS

FG

FG out

Above application example is designed for 12V operation with motor current of 200mA. It uses the following

components:

Hall elements: HW101A (AKE)

1. Selection of C1 and D1:

C1 is used for a noise reduction purpose. A typical value is 0.1uF.

Optimize the value in actual operating conditions if necessary. D1 is a diode for protection against reverse voltage

supply. Silicon rectifier diode (WO3C, 10D1 and equivalent) is appropriate.

2. Lock Protection Function (Design of C2 value):

Lock Protection Function, consists of Motor Lock Detection and Auto Resume Function, is a safety feature to protect

a motor and a driver circuit from fatal destruction in case of motor halt.

Motor Lock Detection detects motor halt due to irregular load conditions and then cuts motor driving current f or

safety operation. A value of C2 determines Lock detection time () and Auto Resume Time (Toff).

-5 -

Share Link: