NRF0433 데이터 시트보기 (PDF) - Unspecified

부품명

상세내역

제조사

NRF0433

Single chip 433MHz RF Transceiver

Unspecified 

PRODUCT SPECIFICATION

nRF0433 Single chip RF Transceiver

Power up in receive mode

During power up in receive mode, the receiver can not receive data until the VDD pins

have been stable at 5V (±5%) for at least 75ms (ton). If an external reference oscillator

is used (figure 4), the receiver may receive data after 7.5ms.

Switching TX ↔ RX

The receiver may not receive data before the TXEN-input has been low for at least

3ms.

No data should be transmitted before the TXEN-input has been high for at least 3ms.

Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway -

Revision: 3.2

Page 6 of 14

Phone +4772898900 - Fax +4772898989

February 2000

Share Link: