NX3L4684
Dual low-ohmic single-pole double-throw analog switch
Rev. 04 — 24 March 2010
Product data sheet
1. General description
The NX3L4684 provides two low-ohmic single-pole double-throw analog switches,
suitable for use as an analog or digital multiplexer/demultiplexer. It has a digital select
input (nS) with Schmitt trigger action, two independent inputs/outputs (nY0, nY1) and a
common input/output (nZ). Schmitt trigger action at the select input (nS) makes the circuit
tolerant to slower input rise and fall times across the entire VCC range from 1.4 V to 4.3 V.
A low input voltage threshold allows pin nS to be driven by lower level logic signals without
a significant increase in supply current ICC. This makes it possible for the NX3L4684 to
switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level
translation.
The NX3L4684 allows signals with amplitude up to VCC to be transmitted from nZ to nY0
or nY1; or from nY0 or nY1 to nZ. Its low ON resistance (0.3 Ω for Y0 port, 0.5 Ω for Y1
port) and flatness (0.1 Ω) ensures minimal attenuation and distortion of transmitted
signals.
2. Features
Wide supply voltage range from 1.4 V to 4.3 V
Very low ON resistance (peak) for Y0 port:
0.8 Ω (typical) at VCC = 1.4 V
0.5 Ω (typical) at VCC = 1.65 V
0.3 Ω (typical) at VCC = 2.3 V
0.25 Ω (typical) at VCC = 2.7 V
0.25 Ω (typical) at VCC = 4.3 V
Break-before-make switching
High noise immunity
ESD protection:
HBM JESD22-A114F Class 3A exceeds 4000 V
MM JESD22-A115-A exceeds 200 V
CDM AEC-Q100-011 revision B exceeds 1000 V
CMOS low-power consumption
Latch-up performance exceeds 100 mA per JESD 78B Class II Level A
1.8 V control logic at VCC = 3.6 V
Control input accepts voltages above supply voltage
Very low supply current, even when input is below VCC
High current handling capability (350 mA continuous current under 3.3 V supply)
Specified from −40 °C to +85 °C and from −40 °C to +125 °C