OPB930 데이터 시트보기 (PDF) - Optek Technology

부품명

상세내역

제조사

OPB930

Photologic® Slotted Optical Switch

Optek Technology 

Photologic® Slotted Optical Switch

OPB930 and OPB940 (L and W Series)

OPB930, OPB940 Buffered Totem-Pole

OPB931, OPB941 Buffered Open-Collector

OPB932, OPB942 Inverted Totem-Pole

OPB933 & OPB943 Inverted Open-Collector

Absolute Maximum Ratings (TA=25°C unless otherwise noted)

Supply Voltage, VCC (not to exceed 3 seconds)

Operating Temperature Range

Storage Temperature Range

Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron] (1)

10 V

-40°C to +70° C

-40°C to +85° C

260° C

Input Infrared LED

Input Diode Power Dissipation (2)

Output Photologic® Power Dissipation (3)

Total Device Power Dissipation (4)

Output Photologic®

Voltage at Output Lead (Open Collector Output)

100 mW

200 mW

300 mW

35 V

Diode Forward DC Current

40 mA

Diode Reverse DC Voltage

2V

Notes:

(1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.

(2) Derate linearly 2.22 mW/°C above 25°.

(3) Derate linearly 4.44 mW/°C above 25°.

(4) Derate linearly 6.66 mW/°C above 25°.

(5) OPB930L/OPB940L series devices are terminated with 0.020” square leads designed for PCBoard mounting.

(6) Methanol and isopropanol are recommended as cleaning agents. Plastic housing is soluble in chlorinated hydrocarbons and

ketones.

(7) All parameters tested using pulse technique.

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Issue A.2 07/07

Page 2 of 7

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747

FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Share Link: