MK-150 데이터 시트보기 (PDF) - Traco Power

부품명

상세내역

제조사

MK-150

Industrial Power Supplies

Traco Power 

DC-UPS-System

Industrial Power Supplies

TIS Series

75-600 Watt

In addition to the standard power supply function, these

models include a professional battery management system

to charge and monitor an external battery. In case of a

power failure the battery is switched automatically and

without any interruption to the DC-output. If mains power

is available again, the battery is switched off. The hold-up

time is limited only by battery capacity and load. Charge

current and voltage can be adjusted to values as required

by battery type. Power fail and low battery alarm signals

are available via two independent relay contacts. During

normal operation the battery status is monitored by

periodically loading the battery for short time. If a cell

resistance is high, there is a relay alarm available. The

battery is fully protected under any operational conditions.

The power supply is short circuit protected even in battery-

backup operation, however for safety reason the battery

should be fused with a fast blow fuse. Battery mode can

be activated by connection of Pin 7 and 8.

Complete external battery modules (3.2 Ah or 7 Ah standard) with lead batteries are available on request.

Models

Ordercode

(includes terminal plugs)

TIS 300-124 UDS

TIS 600-124 UDS

Input Voltage

115 / 230 VAC

selectable

115 / 230 VAC

selectable

Output Power

max.

300 W

600 W

Output Voltage

nom.

24 VDC

24 VDC

Output Current

max.

12 A

24 A

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

http://www.tracopower.com

Page 6

Share Link: