AD8511 데이터 시트보기 (PDF) - Analog Devices

부품명

상세내역

제조사

AD8511

9- and 11-Channel, Muxed Input LCD Reference Buffers

Analog Devices 

AD8509/AD8511

APPLICATIONS

The AD8509 and AD8511 are CMOS buffers with A/B inputs

that are used to select between two different reference voltages set

up by an external resistor ladder. Input bias currents are orders

of magnitude less than competitive parts. This allows very large

resistor ladders to be used to save supply current. A guaranteed

value of 50 nA is much higher than actual values and is limited

by leakage in the test system.

Buffer outputs are designed to drive resistive loads. They are

also stable with capacitive loads, so no resistors should be used

in series with these outputs to attain the best display perform-

ance. Outputs have high slew rates and 6 μs settling times. Each

output can deliver a minimum of 120 mA, assuring fast response

to varying loads.

The AD8509 is a 9-channel buffer and is similar to the LMC6009

in functionality. The AD8511 is an 11-channel buffer similar to

the CL-FP6131. However, the control to select either 9- or

11-channel operation, the EN_11 pin of the CL-FP6131, is not

available on the AD8511. If 9-channel operation is desired, use

the AD8509.

Power supply pins on the AD8509 and AD8511 have multiple

ground and VCC connections. Because of the high peak currents

that these buffers can deliver, it is strongly recommended to

connect all of the ground and VCC pins, and suitably bypass

the VCC pins.

Rev. C | Page 8 of 12

Share Link: