PM6600
2
Pin settings
2.1
Connections
Figure 2. Pin connection (through top view)
Pin settings
2.2
Pin description
Table 2. Pin functions
N°
Pin
Function
1
COMP
Error amplifier output. A simple RC series between this pin and ground is
needed to compensate the loop of the boost regulator.
2
RILIM
Output generators current limit setting. The output current of the ROWs can
be programmed connecting a resistor to SGND.
3
BILIM
Boost converter current limit setting. The internal MOSFET current limit can
be programmed connecting a resistor to SGND.
Switching frequency selection and external sync input. A resistor to SGND
4
FSW
is used to set the desired switching frequency. The pin can also be used as
external synchronization input. See section 1.3 for details.
5
MODE
Current generators fault management selector. It allows to detect and
manage LEDs failures. See section 3.2 for details.
6
AVCC
+5 V analog supply. Connect to LDO5 through a simple RC filter.
7
LDO5
Internal +5 V LDO output and power section supply. Bypass to SGND with a
1 µF ceramic capacitor.
8
VIN
Input voltage. Connect to the main supply rail.
5/43