PS2832-1 데이터 시트보기 (PDF) - NEC => Renesas Technology
부품명
상세내역
제조사
PS2832-1
NEC => Renesas Technology
PS2832-1 Datasheet PDF : 7 Pages
| |||
PS2832-1, -4, PS2833-1, -4
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
• Peak reflow temperature
• Time of temperature higher than 210 ˚C
• Number of reflows
• Flux
235 ˚C (package surface temperature)
30 seconds or less
Three
Rosin flux containing small amount of chlorine (The flux
with a maximum chlorine content of 0.2 Wt % is
recommended).
100 to 160 ˚C
60 to 120 s
(preheating)
(heating)
to 10 s
to 30 s
235 ˚C (peak temperature)
210 ˚C
(2) Dip soldering
• Temperature
• Time
• Number of times
• Flux
Time (s)
260 ˚C or below (molten solder temperature)
10 seconds or less
One
Rosin flux containing small amount of chlorine (The flux
with a maximum chlorine content of 0.2 Wt % is recommended).
(3) Cautions
• Fluxes
Avoid removing the residual flux with chlorine-based cleaning solvent after a reflow process.
CAUTIONS REGARDING NOISE
Be aware that when voltage is applied suddenly between the photocoupler's input and output or between corrector-emitters at
start-up, the output side may enter the on state, even if the voltage is within the absolute maximum ratings.
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected
to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify
CEL for all damages resulting from such improper use or sale.
EXCLUSIVE NORTH AMERICAN AGENT FOR NEC RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS
CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279
DATA SUBJECT TO CHANGE WITHOUT NOTICE
Internet: http://WWW.CEL.COM
01/24/2002
Share Link: