PSRDA05-6-T7 데이터 시트보기 (PDF) - ProTek Devices.
부품명
상세내역
제조사
PSRDA05-6-T7 Datasheet PDF : 5 Pages
| |||
APPLICATION NOTE
PSRDA3.3-6
thru
PSRDA05-6
The PSRDAxx-6 Series are low capacitance, bidirectional TVS arrays that are designed to protect I/O or high speed data lines from the damaging
effects of ESD or EFT. This product series has a surge capability of 500 Watts PPP per line for an 8/20µs waveshape and offers ESD protection >
40kV.
DIFFERENTIAL-MODE CONFIGURATION (Figure 1)
Ideal for use in USB applications, the PSRDAxx-6 Series provides up to six (6) lines of protection in a differential mode configuration as depicted in
Figure 1.
Circuit connectivity is as follows:
✔ Pins 1, 2, 4, 5, 6 and 7 are connected to the datalines.
✔ Pin 8 is connected to ground.
✔ Pin 3 is connected to the databus.
CIRCUIT BOARD LAYOUT RECOMMENDATIONS
Circuit board layout is critical for Electromagnetic Compat-
ibility (EMC) protection. The following guidelines are
recommended:
✔ The protection device should be placed near the input
terminals or connectors, the device will divert the
transient current immediately before it can be coupled
into the nearby traces.
✔ The path length between the TVS device and the
protected line should be minimized.
Figure 1. Typical Differential-Mode USB Protection
USB PORT VBUS
D+
D-
GND
GND
8
7
6
5
USB PORT V
BUS
D+
D-
GND
✔ All conductive loops including power and ground
loops should be minimized.
✔ The transient current return path to ground should be
kept as short as possible to reduce parasitic induc-
tance.
✔ Ground planes should be used whenever possible.
For multilayer PCBs, use ground vias.
1
2 VBUS 3
4
USB PORT VBUS
D+
D-
GND
05110.R7 3/07
4
www.protekdevices.com
Share Link: 