RT9503
Parameter
BAT_ON Pull High
BAT_ON Pull Low Switch
Resistance
BAT_ON Pull High Switch
Resistance
Symbol
Test Conditions
As SYS Raising,
VBATT = 4V, SYS-BAT
VBAT = 4V
VACIN = 5V
Min Typ Max Units
−50
--
0
mV
--
10
--
Ω
--
30
--
Ω
Note 1. Stresses listed as the above “Absolute Maximum Ratings” may cause permanent damage to the device. These are for
stress ratings. Functional operation of the device at these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended
periods may remain possibility to affect device reliability.
Note 2. θJA is measured in the natural convection at TA = 25°C on a high effective four layers thermal conductivity test board of
JEDEC 51-7 thermal measurement standard. The case point of θJC is on the expose pad for the package.
Note 3. Devices are ESD sensitive. Handling precaution is recommended.
Note 4. The device is not guaranteed to function outside its operating conditions.
Note 5. Guaranteed by design.
DS9503-03 April 2011
www.richtek.com
7