PRODUCT OVERVIEW
FEATURES
CPU
• SAM88RCRI CPU core
Memory
• 208-byte general purpose register (RAM)
• 4/8-Kbyte internal mask program memory
• 8-Kbyte internal multi time program memory
(S3F9488)
Oscillation Sources
• Crystal, Ceramic, RC
• CPU clock divider (1/1, 1/2, 1/8, 1/16)
Instruction Set
• 41 instructions
• IDLE and STOP instructions added for power-
down modes
Instruction Execution Time
• 500 ns at 8-MHz fOSC (minimum)
Interrupts
• 10 interrupt sources with one vector / one level
I/O Ports
• Total 38 bit-programmable pins (44QFP)
Total 36 bit-programmable pins (42SDIP)
Total 26 bit-programmable pins (32SDIP/32SOP)
Basic Timer
• One programmable 8-bit basic timer (BT) for
Oscillation stabilization control •
8bit Timers A/B
• One 8-bit timer/counter (Timer A) with three
operating modes; Interval mode, capture mode
and PWM mode.
• One 8-bit timer/counter (Timer B) Carrier
frequency (or PWM) generator.
Watch Timer
• Real-time and interval time measurement.
• Four frequency output to BUZ pin.
• Clock generation for LCD.
S3C9484/C9488/F9488
LCD Controller/Driver (Optional)
• 8 COM × 19 SEG (MAX 19 digit)
4 COM × 19 SEG (MAX 8 digit)
A/D Converter
• Nine analog input channels
• 12.5us conversion speed at 4MHz fADC clock.
Asynchronous UART
• Programmable baud rate generator
• Support serial data transmit/receive operations
with 8-bit, 9-bit UART
Watchdog Timer
• Two oscillation sources selection
(by Smart option)
• Safety work for noise interference
Low Voltage Reset (LVR)
• Low Voltage Check to make system reset
• VLVR = 2.6V/3.3V/3.9V
Voltage Detector for Indication
• Voltage Detector to indicate specific voltage.
• S/W control (2.4V, 2.7V, 3.3V, 3.9V)
Operating Temperature Range
• –25°C to + 85°C
Operating Voltage Range
• 2.2V to 5.5 V at 4 MHz fOSC
• 2.7V to 5.5 V at 8 MHz fOSC
Package Type
• 32-pin SDIP, 32-pin SOP
• 42-pin SDIP, 44-pin QFP
Smart Option
• Low Voltage Reset(LVR) level and enable/disable
are at your hardwired option.
• I/O Port (P0.0- P0.2/P3.3-P3.6) mode selection at
Reset.
• Watchdog Timer oscillator selection.
1-2