SIP32462DB-T2-GE1 데이터 시트보기 (PDF) - Vishay Semiconductors
부품명
상세내역
제조사
SIP32462DB-T2-GE1 Datasheet PDF : 14 Pages
| |||
www.vishay.com
SiP32460, SiP32461, SiP32462
Vishay Siliconix
50 mΩ, Slew Rate Controlled Load Switch in WCSP
DESCRIPTION
The SiP32460, SiP32461, and SiP32462 are slew rate
controlled integrated high side load switches that operate
over the input voltage range from 1.2 V to 5.5 V.
This series of design features slew rate control, reverse
blocking when switch is off, output discharge, and control
logic pull down. The devices are logic high enabled.
The SiP32460, SIP32461, and SiP32462 are available
in compact wafer level WCSP package, WCSP4
0.76 mm x 0.76 mm with 0.4 mm pitch.
FEATURES
• Low input voltage, 1.2 V to 5.5 V
• Low Ron, 54 mΩ/typ. at 3 V
• Slew rate control
• Compatible with 1.2 V to 3.3 V logic
• 7.5 μs turn-on time at 5 V (SiP32462)
Available
• Reverse current blocking when switch is off
• Integrated output discharge switch (SiP32461)
• Integrated pull down resistor at “EN”
• For enable “Low” see SiP32467 and SiP32468
• 4-bump WCSP package
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Smart phones
• GPS and portable media players
• Tablet computers
• Medical and healthcare equipment
• Industrial and instrumentation
• Game consoles
TYPICAL APPLICATION CIRCUIT
VIN
IN
OUT
VOUT
SiP32460, SiP32461, SiP32462
CIN
EN
EN
GND
COUT
GND
Fig. 1 - Typical Application Circuit
GND
S14-0842-Rev. D, 28-Apr-14
1
Document Number: 67754
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Share Link: 