SLY2016 데이터 시트보기 (PDF) - Infineon Technologies

부품명

상세내역

제조사

SLY2016

Alphanumeric Intelligent Display® Devices with Memory/Decoder/Driver

Infineon Technologies 

RED SLR2016

HIGH EFFICIENCY RED SLO2016

GREEN SLG2016

YELLOW SLY2016

X/Y Stackable 0.180" 4-Digit 5 x 7 Dot Matrix

Alphanumeric Intelligent Display® Devices

with Memory/Decoder/Driver

Dimensions in inches (mm)

0.100

(2.54)

0.197 (3 pl.) 0.012 (.3)

(5.00)

±.002 (.05)

0.180

(4.57)

0.400 ±.015

(10.16 ± .38)

0.300 ± .020

(7.62 ± .51)

0.200

(5.08)

0.784 (19.91)

Part Number EIA Date Code

0.150

(3.81)

SLX2016

OSRAM

XXYY

Z

Luminous Intensity Code

FEATURES

• Very Close Multi-line Spacing, 0.4" Centers

• 0.180" 5 x 7 Dot Matrix Characters

• 128 Special ASCII Characters for English,

German, Italian, Swedish, Danish, and

Norwegian Languages

• Wide Viewing Angle: X axis 50° Maximum,

Y Axis ±75° Maximum

• Fast Access Time, 110 ns at 25°C

• Full Size Display for Stationary Equipment

• Built-in Memory

• Built-in Character Generator

• Built-in Multiplex and LED Drive Circuitry

• Direct Access to Each Digit Independently and

Asynchronously

• Clear Function that Clears Character Memory

• True Blanking for Intensity Dimming Applications

• End-stackable, 4-Character Package

• Intensity Coded for Display Uniformity

• Extended Operating Temperature Range: –40°C to

+85°C

• Superior ESD Immunity

• 100% Burned-in and Tested

• Wave Solderable

• TTL Compatible over Operating Temperature Range

See Appnotes 18, 19, 22, and 23 at www.infineon.com/

opto for additional information.

Pin 1

Indicator

0.160 ± .020

(4.06 ±.51)

0.018 (.46)

.100 (2.54)

Non-cumulative (12 pl.)

Tolerance: ±.010 (.25)

DESCRIPTION

The SLR/SLO/SLG/SLY2016 is a four digit 5 x 7 dot matrix display

module with a built-in CMOS integrated circuit. This display is X/Y

stackable.

The integrated circuit contains memory, a 128 ASCII ROM decoder,

multiplexing circuitry and drivers. Data entry is asynchronous. A dis-

play system can be built using any number of SLR/SLO/SLG/SLY2016

since each digit can be addressed independently and will continue to

display the character last stored until replaced by another.

System interconnection is very straightforward. Two address bits (A0,

A1) are normally connected to the like-named inputs of all displays in

the system.

Data lines are connected to all SLR/SLO/SLG/SLY2016s directly and in

parallel as is the write line (WR). The display will then behave as a

write-only memory.

The SLR/SLO/SLG/SLY2016 has several features superior to competi-

tive devices. 100% burn-in processing insures that the SLR/SLO/SLG/

SLY2016 will function in more stressful assembly and use environ-

ments. True “blanking” allows the designer to dim the display for

more flexibility of display presentation. Finally the CLR clear function

will clear the ASCII character RAM.

 2000 Infineon Technologies Corp. • Optoelectronics Division • San Jose, CA

www.infineon.com/opto • 1-888-Infineon (1-888-463-4636)

OSRAM Opto Semiconductors GmbH & Co. OHG • Regensburg, Germany

www.osram-os.com • +49-941-202-7178

1

March 23, 2000-01

Share Link: