DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

SP3223EH 데이터 시트보기 (PDF) - Signal Processing Technologies

부품명
상세내역
제조사
SP3223EH
Sipex
Signal Processing Technologies Sipex
SP3223EH Datasheet PDF : 24 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation
of the device at these ratings or any other above those
indicated in the operation sections of the specifications
below is not implied. Exposure to absolute maximum
rating conditions for extended periods of time may
affect reliability and cause permanent damage to the
device.
VCC.......................................................-0.3V to +6.0V
V+ (NOTE 1).......................................-0.3V to +7.0V
V- (NOTE 1)........................................+0.3V to -7.0V
V+ + |V-| (NOTE 1)...........................................+13V
ICC (DC VCC or GND current).........................+100mA
Input Voltages
TxIN, ONLINE,
SHUTDOWN, EN (SP3223EH).................-0.3V to +6.0V
RxIN...................................................................+15V
Output Voltages
TxOUT...............................................................+15V
RxOUT, STATUS.......................-0.3V to (VCC + 0.3V)
Short-Circuit Duration
TxOUT.....................................................Continuous
Storage Temperature......................-65°C to +150°C
Power Dissipation per package
20-pin PDIP (derate 16.0mW/oC above+70oC).....1300mW
20-pin SSOP (derate 9.25mW/oC above +70oC)....750mW
20-pin TSSOP (derate 11.1mW/oC above +70oC)..900mW
28-pin SOIC (derate 12.7mW/oC above +70oC)....1000mW
28-pin SSOP (derate 11.2mW/oC above +70oC).....900mW
NOTE 1: V+ and V- can have maximum magnitudes of 7V, but their absolute difference cannot exceed 13V.
SPECIFICATIONS
Unless otherwise noted, the following specifications apply for VCC = +3.0V to +5.5V with TAMB = TMIN to TMAX.
Typical values apply at VCC = +3.3V or +5.0V and TAMB = 25°C.
PARAMETER
MIN.
TYP. MAX. UNITS CONDITIONS
DC CHARACTERISTICS
Supply Current, Auto-Online
1.0
Supply Current, Shutdown
1.0
Supply Current, Auto-Online
0.3
Disabled
LOGIC INPUTS AND RECEIVER OUTPUTS
10
µA All RxIN open, ONLINE = GND,
SHUTDOWN = VCC,
VCC = +3.3V, TAMB = +25° C
10
µA SHUTDOWN = GND,
VCC = +3.3V, TAMB = +25° C
1.0
mA ONLINE = SHUTDOWN = VCC,
no load, VCC = +3.3V, TAMB = +25° C
Input Logic Threshold
LOW
HIGH
2.0
VCC = +3.3V or +5.0V, TxIN,
0.8
V EN (SP3223EH), ONLINE,
SHUTDOWN
Input Leakage Current
Output Leakage Current
+0.01
+0.05
+1.0
+10
µA TxIN, EN, ONLINE, SHUTDOWN,
TAMB = +25° C
µA Receivers disabled
Output Voltage LOW
Output Voltage HIGH
0.4
VCC - 0.6 VCC - 0.1
V
IOUT = 1.6mA
V
IOUT = -1.0mA
SP3223EHDS/11
SP3223EH +3.0V to +5.5V RS-232 Transceivers
2
© Copyright 2000 Sipex Corporation

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]