LA9511W 데이터 시트보기 (PDF) - SANYO -> Panasonic
부품명
상세내역
제조사
LA9511W Datasheet PDF : 13 Pages
| |||
Continued from preceding page.
LA9511W
Parameter
Symbol
Conditions
[Control Voltages]
Xtal SELECT [L]
The voltage applied to pin 4 when a 4.43 MHz band
V4L crystal is used. Test pin: 4
Xtal SELECT [H]
The voltage applied to pin 4 when a 3.58 MHz band
V4H crystal is used. Test pin: 4
STANBY SW [L]
The voltage applied to pin 14 to perform a standby
V14L operation. Test pin: 14
STANBY SW [H]
The voltage applied to pin 14 to clear standby.
V14H Test pin: 14
DRIVE SW [L]
The voltage applied to pin 21 to perform a LED off
V21L operation. Test pin: 21
DRIVE SW [H]
The voltage applied to pin 21 to perform a LED on
V21H operation. Test pin: 21
[In Combination with a Demodulator] Using the IFR-C1 (4 MHz version) Sony receiver IC
Audio left channel amplitude
VAL
VIN = –30 dBs (400 Hz)
Deviation ±22.5 kHz, demodulator output
Audio right channel amplitude
VAR
VIN = –30 dBs (400 Hz)
Deviation ±22.5 kHz, demodulator output
L/R output difference
VAL/R
VIN = –30 dBs (400 Hz), simultaneous L/R inputs
Deviation ±22.5 kHz, demodulator output
Audio left channel distortion
Audio right channel distortion
Audio left channel noise
THDLT
THDRT
VNL
VIN = –3 dBs (1 kHz), demodulator output
VIN = –3 dBs (1 kHz), demodulator output
No input, Rg = 3 kΩ, IHFA filter
Demodulator output
Audio right channel noise
No input, Rg = 3 kΩ, IHFA filter
VNR Demodulator output
Ratings
Unit
min
typ
max
0.4 Vdc
1.1
Vdc
0.8 Vdc
2.0
Vdc
0.8 Vdc
2.0
Vdc
250
250
–3
0
1.5
1.5
–56
–56
mVrms
mVrms
+3
dB
%
%
dBs
dBs
No. 6468-4/13
Share Link: 