ADPRF 데이터 시트보기 (PDF) - Gamewell-FCI by Honeywell

부품명

상세내역

제조사

ADPRF

Analog Addressable Low-Flow Duct Sensor

Gamewell-FCI by Honeywell 

Description (continued)

Remote alarm annunciation can be accomplished by using

the RA400Z remote annunciator or the RTS451or

RTS451KEY remote test station. Both these devices allow

testing of the sensor from a remote location.

ADPF low-flow duct sensors are designed for simplified

installation and easy maintenance. The modular construc-

tion allows for easy cleaning and uncomplicated field

replacement of the UL recognized power and sensor

boards.

The ADPF (non-relay) has outputs for a remote LED dis-

play and remote test switch. It incorporates zener diodes

to conserve power for communications to other devices.

The ADPF is a 2-wire device that requires signaling line

circuit power only.

The ADPRF (with relay) has powered outputs for remote

LED indication with a remote test switch and audible

sounder. Two form “C” auxiliary contacts can be config-

ured as a relay version or jumpered to mimic the non-relay

version. It has a patented cover tamper trouble signal. The

ADPRF is a 4-wire device that requires both signaling line

circuit power and either 24VAC/DC or 120/240VAC for

proper operation.

Specifications

Operating Temperature

Operating Humidity

Range:

Storage Temperature

Range:

Duct Air Velocity:

Shipping Weight:

Dimensions

Length:

Width:

Depth:

32° to 131° F (0° to 55° C)

10 to 93% relative humidity

(non–condensing)

-22° to 158° F

(-30° to +70° C)

100-4000 ft./min.

(0.5—20.32 m/s)

ADPF: 3.35 lbs. (1.5 kg)

ADPFRF:3.90 lbs. (1.8 kg)

14 3/4” (37 cm)

5 1/2” (14 cm)

2 3/4” (7 cm)

Model ADPF (Non-relay)

Voltage Range:

15 to 32 VDC

Standby Current:

300 µA @ 24 VDC

(one communication every 5

seconds with LED flash

enabled)

Model ADPFRF (with Relay)

Current Requirements (using no accessories)

Power

Supply Voltage: 20-30 VDC 30 VAC,

120 VAC, 22/240 VAC,

Max. Standby

Current:

26 mA

50-60 Hz 50-60 Hz 50-60 Hz

65 mA RMS 44 mA RMS 25 mA RMS

Max. Alarm

Current:

87 mA 182 mA RMS 52 mA RMS 30 mA RMS

Alarm Response

Time:

3 to 10 sec. 3 to 10 sec. 3 to 10 sec. 3 to 10 sec.

Auxiliary Relay Contact Ratings

Alarm auxiliary contacts* (DPDT):

10 A @ 30 VDC

10 A @ 277 VAC (0.75 power factor)

240 VA @ 249 VAC (0.4 power factor)

1/8 HP @ 120 VAC

1/4 HP @ 240 VAC

Supervisory contact (SPST):

2.0 A @ 30 VDC (resistive)

Minimum switching current for auxiliary contact must be

100 mA DC minimum @ 5 VDC.

Accessory Current Loads at 24 VDC

Device

Standby

Alarm

PA400

RA400Z

RTS451/

0 mA

0 mA

0 mA

15 mA Max.

12 mA Max.

10 mA Max.

RTS451KEY

Ordering Information

Part Number Description

ADPF

Analog addressable low-flow photoelec-

tronic non-relay duct smoke sensor

ADPRF

Analog addressable low-flow photoelec-

tronic with relay duct smoke sensor

ST-1.5

Sampling tube duct widths 1’-2’

ST-3

Sampling tube duct widths 2’-4’

ST-5

Sampling tube duct widths 4’-8’

ST-10

Sampling tube duct widths 8’-12’

A5060

Replacement power board for ADPF-RF

(w/relay)

A5067

Replacement power board for ADPF

(w/o relay)

Accessories Description

RTS451

Remote test station

RTS451KEY Remote test station w/key

RA400Z

Remote LED

F36-09-11 Replacement filters

M02-04-00 Test magnet

P48-21-00 End cap of metal sampling tube

P48-61-00 End cap for plastic sampling tube

S08-39-01 Replacement photo insect screen

GAMEWELL-FCI

12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118

9020-0622 Rev. C page 2 of 2

www.gamewell-fci.com

Share Link: