STSR2P 데이터 시트보기 (PDF) - STMicroelectronics

부품명

상세내역

제조사

STSR2P

FORWARD SYNCHRONOUS RECTIFIERS SMART DRIVER

STMicroelectronics 

TIMING DIAGRAM

STSR2P/STSR2PM

APPLICATION INFORMATION: STSR2 IN FORWARD CONVERTER SECONDARY SIDE

NOTES

1) Ceramic Capacitors C1 and C2 must be placed very close to the IC;

2) R1 and R2 set the anticipation time by partitioning the VCC voltage;

3) R3 and R4 is a resistor divider meant to provide the correct CK voltage range;

4) R5 limits the current flowing through diode D2 when Freewheeling drain voltage is high;

5) D1 could be necessary to protect INHIBIT pin from negative voltages.

6) D2 could be necessary to protect INHIBIT pin from voltages higher than VCC

7) D3 could be necessary to protect CK pin from voltages higher than VCC.

8) SGLGND layout trace must not include OUTGATE1,2 current paths.

9) A capacitor in parallel with R4 could be necessary to eliminate turn off voltage spike.

5/12

Share Link: