LB1916 데이터 시트보기 (PDF) - SANYO -> Panasonic
부품명
상세내역
제조사
LB1916 Datasheet PDF : 7 Pages
| |||
Continued from preceding page.
Pin No. Pin Pin voltage
LB1916
Pin function
• Hall FG pins
28
27
HFG2
HFG1
0 to VCC2
• The Hall waveform is modified and used as FG pulses.
• The phase relationship between HFG1 and HFG2 is used as a
forward/reverse signal.
Equivalent circuit
• The current limiter operates when the Rf pin voltage reaches the
26
CL
0 to VCC2 voltage on the CL pin.
The CL potential is determined externally.
• Power supply for the output block
25
VCC1 5 to 12.5 V • The power supply provided to this pin must be well stabilized so
that noise does not occur.
s No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace
equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of
which may directly or indirectly cause injury, death or property loss.
s Anyone purchasing any products described or contained herein for an above-mentioned use shall:
Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and
distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all
damages, cost and expenses associated with such use:
Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on
SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees
jointly or severally.
s Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for
volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied
regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of May, 1997. Specifications and information herein are subject to change
without notice.
No. 5653-7/7
Share Link: 